How Should an EA960R4 Billboard Quote Split SMD, DIP and Cabinet Scope?

Quick answer

For an EA960R4 quotation, split the display line by pixel pitch and SMD or DIP configuration, then give the 960 × 960 mm magnesium alloy cabinet and its rear-service features a separate line. Tie brightness to the exact quoted model: the documented range is 5,000–8,000 cd/m² depending on pixel pitch and LED configuration, with P10 (2S) SMD at 5,800 cd/m² and P10 DIP at 8,000 cd/m². Keep control, structure, spares and delivery separate.

Sources used: EA960R4 specs

Start with the exact EA960R4 display configuration

A useful EA960R4 quotation starts by naming the exact display configuration. The supplied product description lists pixel pitch options from P2.5 to P10, including 10 mm SMD and DIP models. Because pitch and LED type are separate variables, the display line should state both rather than relying on the model name alone. EA960R4 is described for outdoor commercial advertising, fixed installation and rental applications, so the same family can be proposed for different project contexts. That makes the selected pitch and LED type the first commercial item to pin down.

Brightness is tied to the selected model in the supplied evidence. For EA960R4, brightness ranges from 5,000 to 8,000 cd/m² depending on the pixel pitch and LED configuration. The P10 (2S) SMD model is rated at 5,800 cd/m², while the P10 DIP model is rated at 8,000 cd/m². A quote that gives only the overall range does not show which value applies to the offered build. Ask for the brightness figure that matches the exact pitch and SMD or DIP selection, and keep it on the same line as the model and quantity.

The source also states a refresh frequency of at least 3,840 Hz across the listed models. Treat that as an attribute to tie to the quoted configuration, not as a replacement for identifying the pitch and LED type. When you compare LED screen quotes, keep the selected pitch and LED type at the top of the comparison.

Treat SMD and DIP as separate EA960R4 quotation lines

SMD and DIP should not be hidden inside one generic P10 line. The EA960R4 evidence names 10 mm SMD and DIP models and gives different brightness figures for two P10 configurations: 5,800 cd/m² for the P10 (2S) SMD model and 8,000 cd/m² for the P10 DIP model. A quotation should show the LED type, the pitch, the applicable brightness and the quantity together, so the buyer can see whether the offer matches the intended billboard build before comparing commercial terms.

For pitches other than P10, the source states the overall pitch range and the overall brightness range, but it does not list every pitch’s SMD or DIP availability or every model-specific brightness value. Ask the supplier to state whether the requested pitch is offered in the required LED type and to name the brightness that applies to that exact configuration. Do not carry the P10 DIP figure across to another pitch or assume that a broad range resolves the selection.

Use a simple conditional rule. Choose SMD or DIP only after the supplier ties the offered LED type to the quoted pixel pitch and provides the corresponding brightness. If that link is missing, treat the display configuration as unresolved. The supplied evidence does not rank SMD against DIP as a general performance hierarchy, so the comparison should stay with the documented model values rather than an assumed preference.

EA960R4 quotation lines to itemise

Give the 960 × 960 mm cabinet and rear service its own line

The EA960R4 cabinet is a magnesium alloy cabinet measuring 960 × 960 mm, and the source states that it supports rear maintenance. The cabinet is also described with three handles, four quick locks and an openable back cover. Ask the quotation to identify the cabinet dimensions, cabinet material, handle and lock arrangement, and the service opening as separate items from the LED configuration. This keeps the cabinet identity checkable when the order is confirmed.

Rear service is a site condition as well as a product feature. The source says the back cover can be opened for maintenance operations and advises planning access behind the screen when choosing an installation location. It also describes a reserved hole on the side for the power cord and a hidden-line design in which power and signal cables connect through holes reserved on the side. The quotation should state how that rear access and cable route are preserved for the intended location.

Thermal and weather protection also belong on the cabinet line. The EA960R4 back cover is equipped with two wing-shaped fans for fast heat dissipation, and the outdoor series cabinets feature an IP65 protection rating that the source describes as withstanding wind and rain and enhancing protective performance. Ask the supplier to confirm the IP65 scope for the exact cabinet offered and how the fan cooling and rear maintenance route are maintained. Treat IP65 as the documented cabinet rating, not as confirmation of mounting, drainage or service assumptions that remain part of the site.

Separate control, structure, spare modules and delivery scope

The product description gives display-side information and asks buyers to contact EagerLED with screen dimensions, installation location and preferred pixel pitch for a project quotation. Our advice is to keep the control system, mounting structure, spare modules and delivery as separate quotation lines, because separate lines make hardware versus installed cost easier to compare. For a fixed outdoor billboard, the structure and service route affect how the screen is installed; for rental use, handling, transport and spares affect the fleet.

Control is one of those separate lines. Ask what control system, video processing, sending and receiving equipment, content loading, playback setup and commissioning are included or excluded, and record the answers beside the display line. If control is left inside a blended price, the buyer cannot tell what is being supplied or what remains to be arranged.

Spare modules should match the quoted pitch and SMD or DIP configuration. Because the EA960R4 range includes multiple pixel pitches and LED configurations, a generic spare LED module line is difficult to check against the delivered screen. Ask whether spares are included or priced separately and how they are matched to the ordered display. Delivery should also appear as its own line with destination, delivery terms and receiving responsibilities stated. Use a spare modules checklist to keep the replacement question visible.

A conditional sequence for choosing EA960R4 SMD, DIP and cabinet scope

A workable sequence is to select the pixel pitch and LED type first, then confirm the model-specific brightness and refresh. Next, confirm the 960 × 960 mm cabinet, rear-service route, fan cooling and IP65 scope. Then add control, structure, spare modules, delivery and acceptance to the written scope. This order keeps the technical configuration ahead of commercial comparison and is our suggested purchasing method.

Defer the decision when the quotation does not name the pitch and SMD or DIP selection, when brightness is stated only as a broad range, or when the rear-service route cannot be reconciled with the intended installation location. The source names brightness values for two P10 builds and an overall range that depends on pitch and LED configuration, so an unnamed configuration should not be accepted as final.

Common mistakes follow the same scope. One is pricing the EA960R4 by family name without the pitch and LED type. Another is applying the P10 DIP figure of 8,000 cd/m² to a different configuration. A third is treating IP65 as a complete outdoor approval without confirming the cabinet, service access and surrounding structure. A fourth is leaving control, spares and delivery inside a single number. A factory acceptance test can be added to check the agreed configuration before shipment.

Conditional checks for an EA960R4 quotation

Buyer checklist

• Ask the quotation to name the pixel pitch and whether the offered LED configuration is SMD or DIP.
• Ask for the brightness value that applies to the exact pitch and LED configuration; the documented range is 5,000–8,000 cd/m², with 5,800 cd/m² for P10 (2S) SMD and 8,000 cd/m² for P10 DIP.
• Ask for the at least 3,840 Hz refresh figure for the quoted build.
• Ask for the 960 × 960 mm magnesium alloy cabinet, rear maintenance, three handles, four quick locks, openable back cover and side cable route as separate cabinet-line details.
• Ask for the two wing-shaped fans and IP65 outdoor-series rating to be confirmed for the exact cabinet offered.
• Ask for control, structure, spare modules and delivery to appear as separate included or excluded lines.

Frequently asked questions

How should an EA960R4 quote separate SMD and DIP options?

Put the LED type on the same line as the pixel pitch. The source names 10 mm SMD and DIP models and gives 5,800 cd/m² for the P10 (2S) SMD model and 8,000 cd/m² for the P10 DIP model. For any other pitch, ask for the brightness that applies to that exact pitch and LED configuration within the documented 5,000–8,000 cd/m² range.

Does the EA960R4 quotation need a separate cabinet line?

Yes, make it a separate line. The cabinet is described as a 960 × 960 mm magnesium alloy cabinet that supports rear maintenance, with three handles, four quick locks, an openable back cover and a reserved side hole for the power cord. The back cover has two wing-shaped fans, and the outdoor series cabinets feature IP65 protection.

Which brightness value applies to P10 SMD and P10 DIP?

The P10 (2S) SMD model is rated at 5,800 cd/m² and the P10 DIP model at 8,000 cd/m². Across the EA960R4 range, brightness is listed from 5,000 to 8,000 cd/m² depending on pixel pitch and LED configuration. Ask for the value tied to the exact quoted build rather than accepting the full range.

Should control, structure, spare modules and delivery be inside the display price?

Our advice is to price them separately. The product page describes the display and its applications and asks buyers to contact EagerLED with screen dimensions, installation location and preferred pixel pitch for a project quotation. Separate lines let you see what each proposal includes around the display, and what remains to be arranged.

Is IP65 alone enough to approve the outdoor installation?

IP65 is the documented protection rating for the EA960R4 outdoor series cabinets and is described as withstanding wind and rain. Ask the supplier to confirm the IP65 scope for the exact cabinet offered and to state how the mounting structure, drainage, cable route and rear service access are handled for your site, since those items sit outside the cabinet rating itself.

What information should accompany an EA960R4 quotation request?

Provide the screen dimensions, installation location and preferred pixel pitch. Those are the inputs the source asks buyers to send for a project quotation. Add the intended application, whether fixed installation or rental, so the supplier can scope handling, service access and surrounding items consistently.

Share your project requirements to request a quote.