EA1000TOF2 vs EA1000TiF2: Fixed Transparent LED Screen Choice

Quick answer

Choose EagerLED EA1000TOF2 for a fixed outdoor facade where IP65 protection, 60% transparency and rear-access maintenance suit an accessible back. Choose EA1000TiF2 for fixed indoor glass where IP33, 60% transparency, 1000 × 1000 mm or 1000 × 500 mm cabinets and up to 5000 cd/m² fit retail windows, showrooms or glass walls. Confirm the exact cabinet, weight, operating range and service route in writing.

Sources used: EA1000TiF2 specs; EA1000TOF2 specs

Exposure and Protection Decide First

Start with where the screen will operate, not with brightness. The EA1000TOF2 is a fixed outdoor transparent LED screen for facade and architectural display installations. Its source documents IP65 protection, achieved with fully sealed LED beads and silicone-encapsulated PCBs, and a specified operating temperature range of -20°C to +50°C. Use it only when the project is genuinely outdoor or exposed to dust and rain and the supplier confirms the IP65 basis for the exact cabinet.

The EA1000TiF2 is a fixed indoor transparent LED screen for retail windows, glass walls, showrooms and commercial interiors. Its aluminum cabinet has an IP33 protection grade and is designed for fixed indoor use, with a published operating range of -20°C to +60°C. If the glass is indoors and protected from rain and dust ingress, this indoor scope is the relevant starting point.

Transparency and Cabinet Planning

Both models are documented at 60% transparency. For the EA1000TOF2, that figure applies to the outdoor transparent screen, and the source states that the design keeps views behind the screen and maintains environmental transparency. For the EA1000TiF2, 60% transparency is described as keeping sightlines and ambient light visible while content is presented across the glass surface. Because the percentage is equal, transparency alone does not separate them; exposure and cabinet fit do.

Cabinet formats differ in the evidence. The EA1000TiF2 offers 1000 × 1000 mm and 1000 × 500 mm cabinets. Its 1000 × 1000 mm aluminum cabinet weighs 6.7 kg. The EA1000TOF2 lists a 1000 × 1000 mm cabinet, with smaller 1000 × 500 mm and 1000 × 750 mm options; documented weights are 8.5 kg, 12.5 kg and 15.8 kg respectively. The 1000 × 1000 mm outdoor cabinet is approximately 80 mm thick. These figures are cabinet hardware details, not mounting or load ratings.

EA1000TOF2 and EA1000TiF2 Fixed Transparent Comparison

Rear Access and Maintenance Route

Both models are described with rear-access maintenance. The EA1000TiF2 has an openable rear cover for direct access to the cabinet interior, and its rear-access structure is designed for fixed indoor installations where maintenance is planned from behind the screen. The EA1000TOF2 openable rear cover also gives technicians direct access to internal components, and the rear-service design is suited to fixed outdoor projects where the back of the cabinet remains accessible.

Treat rear access as a site condition, not a model guarantee. If the facade or glass wall has a technical corridor, riser or rear room, rear access can be planned. If the back is finished or unreachable, ask the supplier how the installed screen would be serviced before accepting the configuration. Our advice is to define that route in a service-response agreement and keep it separate from the cabinet line.

Brightness, Refresh and Viewing

The EA1000TiF2 is documented with brightness up to 5000 cd/m², a 140° viewing angle and a refresh rate of at least 3840 Hz. The EA1000TOF2 is documented with 4,500 cd/m² brightness, available configurations providing 4,500–5,000 cd/m² brightness, and a refresh rate of at least 3,840 Hz. For edge-seat visibility, ask EagerLED to confirm the applicable viewing-angle figure for the exact cabinet.

For either model, do not accept a range as the configured value. Ask EagerLED to name the brightness, transparency and refresh figures that apply to the quoted cabinet size and configuration. If the screen will appear on camera, include a camera test at the planned frame rate and shutter. If the installation is judged by viewers at an angle, test the content from the intended positions rather than relying on a model-level number.

Match the Model to the Project Scenario

For an indoor retail window, showroom glass wall or commercial interior, the EA1000TiF2 is the documented indoor option. Its 1000 × 1000 mm and 1000 × 500 mm cabinets and 6.7 kg 1000 × 1000 mm cabinet are planning inputs for fixed indoor installation. The 60% transparency and up to 5000 cd/m² brightness are attached to that indoor scope.

For a permanent outdoor facade, billboard or architectural feature exposed to dust and rain, the EA1000TOF2 is the documented outdoor option. Its IP65 rating, -20°C to +50°C operating range and 4,500 cd/m² brightness are specific to that outdoor transparent screen. These are fixed-installation models in the supplied evidence; confirm temporary or rental use separately with EagerLED if needed.

Quotation and Acceptance Checks

Build the quotation around the decisions that change the delivered screen: model, cabinet size, quantity, transparency, brightness, refresh, IP rating basis, operating range, service route, control scope and spare modules. For EA1000TOF2, the quotation should name which 1000 × 1000 mm, 1000 × 750 mm or 1000 × 500 mm cabinet is priced and its documented weight. For EA1000TiF2, it should name whether the 1000 × 1000 mm or 1000 × 500 mm cabinet is used and the 6.7 kg figure for the 1000 × 1000 mm cabinet. Use a line-by-line method to compare LED screen quotes rather than a headline total.

Before dispatch, record a factory acceptance test that checks the exact cabinet, transparency, brightness, refresh, protection rating, operating range and rear-access configuration against the order. For EA1000TOF2, the documented range includes 4,500–5,000 cd/m², at least 3,840 Hz, 60% transparency and cabinet weights from 8.5 to 15.8 kg. For EA1000TiF2, it includes up to 5000 cd/m², at least 3840 Hz, 60% transparency and a 6.7 kg 1000 × 1000 mm cabinet. The buyer should not accept a broad range without the supplier naming the value for the selected build.

Common Mistakes and When to Defer

A common mistake is selecting by brightness alone. The indoor model lists up to 5000 cd/m² and the outdoor model lists 4,500 cd/m² with configurations to 5,000 cd/m², so the headline figures are close. The decisive differences in the supplied evidence are exposure rating, operating temperature range, cabinet size and weight, and the rear-access condition.

Another mistake is assuming rear access is available because the cabinet has an openable rear cover. Both sources tie rear service to the back of the cabinet remaining accessible. Defer the order if the site cannot provide a documented service route, if the destination temperature falls outside the quoted model range, or if the supplier will not name the exact cabinet size and configured brightness. Resolve those points before comparing commercial totals.

Deferring is not a rejection of either model. It means the project evidence is incomplete for the conditions that change fit. A fixed indoor glass project with protected rear access and an indoor operating environment points toward EA1000TiF2. A fixed outdoor facade with dust and rain exposure and an accessible service side points toward EA1000TOF2. If neither condition set is confirmed, keep both options open and ask for written configuration details.

Project Scenario Starting Point

Buyer checklist

• Name the exact cabinet size and quantity before comparing prices; EA1000TOF2 lists 1000 × 1000 mm, 1000 × 750 mm and 1000 × 500 mm, while EA1000TiF2 lists 1000 × 1000 mm and 1000 × 500 mm.
• Confirm the protection rating and operating range for the quoted model: IP65 and -20°C to +50°C for EA1000TOF2; IP33 and -20°C to +60°C for EA1000TiF2.
• Request transparency, brightness and refresh for the exact configuration; both list 60% transparency and at least 3,840 Hz, with brightness up to 5000 cd/m² for EA1000TiF2 and 4,500–5,000 cd/m² for EA1000TOF2.
• Confirm the rear-access service route and clearance for the installed orientation; both models document rear-access maintenance.
• Put mounting, control, spare modules, commissioning and freight on separate quotation lines so inclusions can be compared.
• Define an acceptance test and written handover before order, including the configured cabinet, protection rating and operating range.

Frequently asked questions

Can EA1000TOF2 be used indoors?

The supplied evidence describes EA1000TOF2 as a fixed outdoor transparent LED screen for facade and architectural display installations, with IP65 protection and a -20°C to +50°C operating range. It does not document indoor use for this model. Ask EagerLED for a written position if you plan an indoor installation.

Is EA1000TiF2 suitable for outdoor use?

The supplied evidence describes EA1000TiF2 as a fixed indoor transparent LED screen with an IP33 protection grade and a -20°C to +60°C operating range. Outdoor exposure is not documented for this model. If the glass area is exposed to rain or dust, ask EagerLED to confirm the correct product scope in writing.

Which model has higher transparency?

Both EA1000TOF2 and EA1000TiF2 are documented at 60% transparency in the supplied evidence. If you are quoted a different cabinet or configuration, request the transparency figure for that exact build rather than relying on the model headline.

Which cabinet is lighter?

For the 1000 × 1000 mm aluminum cabinet, EA1000TiF2 is documented at 6.7 kg and EA1000TOF2 at 15.8 kg. EA1000TOF2 also lists 8.5 kg for the 1000 × 500 mm option and 12.5 kg for the 1000 × 750 mm option. Compare the same cabinet size and confirm the weight per cabinet in the quotation.

Do both models support rear-access maintenance?

Both models are described with rear-access maintenance and an openable rear cover. EA1000TiF2 is designed for fixed indoor installations where maintenance is planned from behind, while EA1000TOF2 is suited to fixed outdoor projects where the back of the cabinet remains accessible. Confirm the actual rear clearance for the installed position.

What should an EA1000TOF2 or EA1000TiF2 quotation include?

Ask the quotation to name the model, exact cabinet size and quantity, transparency, configured brightness, refresh, IP rating basis, operating range and rear-access service route. For EA1000TOF2, name which 1000 × 1000 mm, 1000 × 750 mm or 1000 × 500 mm cabinet is priced. For EA1000TiF2, name whether the 1000 × 1000 mm or 1000 × 500 mm cabinet is used.

Share your project requirements to request a quote.