EA500H7 Outdoor P2.6 vs P3.91: Flexible Rental Pitch for a Curved Event Wall

Quick answer

The EA500H7 source lists P2.6 and P3.91 as outdoor pixel pitches for the 500×500 mm flexible rental cabinet and directs selection by venue conditions and viewing distance. For a curved event wall, choose between them only after a content and camera test at the closest regular viewer position, then confirm the exact quoted pitch, outdoor IP65 configuration, permitted bending range, radius and cabinet count in writing.

Sources used: EA500H7 specs

Outdoor EA500H7 P2.6 and P3.91: what the source confirms

The EA500H7 flexible rental LED display is documented with 500×500 mm cabinets for curved stage backdrops, exhibitions and event video walls. The same source lists outdoor models with P2.6, P2.97 and P3.91 pixel pitches, 4,500–4,800 cd/m² brightness and IP65 protection. P2.6 is listed for both indoor and outdoor EA500H7 models; P3.91 is listed for outdoor EA500H7 models.

The source also states that the series specifies at least 3,840 Hz refresh and a 140-degree viewing angle. The cabinet weighs 7 kg, uses quick locks on the cabinet edges for alignment, and includes four foldable corner protectors. A removable rear power box with a hub-connected design and buckle fasteners provides access to rear electronics during servicing, so rear working space is part of the planning. These shared features do not change between P2.6 and P3.91 in the supplied evidence.

Choosing between P2.6 and P3.91 for a curved event wall

The source says to select the EA500H7 model for the venue conditions and viewing distance. For a curved event wall, that makes the closest regular viewer position, the smallest essential text or graphic, and the intended camera view part of the pitch decision. Use a pixel pitch and viewing distance method to frame those inputs before comparing quotations.

A practical test is to request a content demonstration for the exact P2.6 or P3.91 configuration at the intended audience distance. If the event will be filmed, ask whether the quoted configuration can be tested with the planned camera, shutter and processing settings. That test is our suggested purchasing step; the EA500H7 source only directs buyers to consider venue conditions and viewing distance.

EA500H7 outdoor P2.6 and P3.91 decision checks

Curve adjustment, radius and cabinet count for a curved wall

Curve capability is documented for the EA500H7 series: flexible modules and a sliding curve adjustment mechanism let installers set cabinet curvature, and the cabinets can form concave, convex and cylindrical shapes. The source asks buyers to share the required radius, viewing direction and wall dimensions before ordering so the cabinet arrangement can be checked. It also says to confirm the permitted bending range for the selected configuration before assembly. P2.6 or P3.91 does not remove those checks.

The cabinet-count starting point is also documented. Each 500×500 mm cabinet covers 0.25 square meters, and the source gives a flat 4 m by 3 m wall example of 8 cabinets across and 6 high, 48 cabinets in total, before allowing for spares or a different curved layout. For a curved wall, the final shape and cabinet count depend on the approved radius and screen dimensions. Provide a layout drawing with the quotation request so the pitch, curvature and cabinet quantity are reviewed together.

Outdoor protection, brightness and service access

Both P2.6 and P3.91 are listed within the EA500H7 outdoor range, which the source describes with 4,500–4,800 cd/m² brightness and IP65 protection. The exact quoted model should state its brightness and protection rating rather than relying on the family headline. The source also lists indoor EA500H7 models at 750–800 cd/m² with IP31 protection, which shows why the outdoor scope must be kept separate.

Service access is rear-oriented in the supplied EA500H7 evidence. The removable rear power box uses a hub-connected design and buckle fasteners, and the source says to allow working space behind the wall during installation. It also says to confirm the service access required for the selected cabinet configuration. For a curved event wall, confirm that the planned curve does not reduce the rear clearance needed for the quoted P2.6 or P3.91 cabinet.

Quotation and spare planning for P2.6 or P3.91

The source asks for a quote with screen size, pixel pitch, curve requirements and destination. As a purchasing method, keep the cabinet model, exact pitch, curve hardware or bending confirmation, control equipment, spare parts, packaging and freight on separate quote lines so you can compare LED screen quotes on the same inclusions. That itemisation is our advice, not a documented EA500H7 requirement.

Spare-module planning should be treated as a separate request. As your own method, order spare modules and spare parts matched to the exact P2.6 or P3.91 pitch and cabinet generation, and label them for the rental fleet. Ask the supplier to state the spare-module part number, the cabinet or module it fits, and any minimum order quantity in writing. For a broader method, see how to plan spare modules for an LED display.

Conditional selection rule for a curved outdoor event wall

Choose P2.6 when the project needs the smaller of the two documented outdoor pitches and a content check at the closest regular viewer position supports it. Choose P3.91 when the larger pitch is acceptable for the intended content, viewing distance and budget, and the curved layout can still meet the approved radius and cabinet count. If the viewing distance or content size is not fixed, defer the pitch choice until the supplier confirms the exact outdoor model, brightness, IP65 scope, bending range and layout drawing.

Curved event wall scenario checks

EA500H7 per-cabinet display area

Illustrative calculation: 0.5 × 0.5 = 0.25 m². Illustrative calculation: 0.5 m × 0.5 m cabinet format converted to reproduce the 0.25 square metre per-cabinet display area stated for the 500×500 mm EA500H7 cabinet.

EA500H7 flat 4 m wall, cabinets across

Illustrative calculation: 4 ÷ 0.5 = 8 cabinets. Reproduces the sourced EA500H7 flat 4 m by 3 m layout example: 4 m wall width divided by the 0.5 m cabinet width gives 8 cabinets across.

EA500H7 flat 3 m wall, cabinet rows

Illustrative calculation: 3 ÷ 0.5 = 6 cabinets. Reproduces the sourced EA500H7 flat 4 m by 3 m layout example: 3 m wall height divided by the 0.5 m cabinet height gives 6 cabinets high.

EA500H7 flat 4 m by 3 m total cabinets

Illustrative calculation: 8 × 6 = 48 cabinets. Reproduces the sourced EA500H7 flat 4 m by 3 m layout example before allowing for spares or a different curved layout: 8 cabinets across multiplied by 6 rows gives 48 cabinets.

Buyer checklist

• Confirm the exact outdoor model is P2.6 or P3.91 for the curved EA500H7 wall.
• Provide radius, viewing direction and wall dimensions, and confirm the permitted bending range for the selected configuration.
• Confirm outdoor brightness and IP65 protection for the exact quoted pitch.
• Request a content review at the closest regular viewer position for the exact pitch.
• Ask for a layout drawing and cabinet count based on the approved radius; treat the flat 4 m by 3 m example of 48 cabinets as a non-curved reference only.
• Keep spare modules matched to the exact pitch as a separate quote line.

Frequently asked questions

Which EA500H7 outdoor pitch is better for a curved event wall: P2.6 or P3.91?

The source lists both P2.6 and P3.91 as outdoor EA500H7 pixel pitches and says to select the model for venue conditions and viewing distance. It does not give a viewing-distance rule for either. Choose the pitch after a content check at the closest regular viewer position and confirm the exact outdoor configuration, brightness, IP65 scope, radius and bending range in writing.

Are EA500H7 P2.6 and P3.91 both outdoor and IP65?

The EA500H7 source says indoor models offer P1.95, P2.6 and P2.97, while outdoor models offer P2.6, P2.97 and P3.91. It specifies IP65 protection for outdoor models and 4,500–4,800 cd/m² brightness. Confirm the exact quoted model, because the source presents these as configuration-specific options.

Does the EA500H7 P2.6 or P3.91 change the curve method?

The source documents the series with flexible LED modules and a sliding curve adjustment mechanism, and it says the cabinets can form concave, convex and cylindrical shapes. It does not state that the curve method changes by pitch. Share the required radius, viewing direction and wall dimensions and confirm the permitted bending range for the selected configuration.

How many EA500H7 cabinets does a curved wall need?

The source does not give a curved-wall cabinet count formula. It states that each 500×500 mm cabinet covers 0.25 square meters and gives a flat 4 m by 3 m example of 48 cabinets before spares or a different curved layout. It also says final shape and cabinet count depend on the approved radius and screen dimensions, so request a layout drawing.

Can I mix EA500H7 P2.6 and P3.91 in one curved wall?

The supplied EA500H7 passage does not document mixing P2.6 and P3.91 within one wall. It does document combinations with EA500H8, EA500H8V right-angle cabinets and EA1000H8 and says to confirm matching pixel pitch, cabinet connection and control configuration before combining models. Ask the supplier to confirm the exact pitch mix in writing.

Share your project requirements to request a quote.