Which EA-iFilm2 Quotation Inputs Change With Transparency, Module Size and Glass Mounting?

Quick answer

For an EA-iFilm2 indoor flexible film LED display, ask EagerLED to fix the quoted transparency within the documented 90%–95% range, state the approximately 2 mm and about 1 kg module line, confirm the module count and area for the glass opening, and confirm the self-adhesive mounting scope with no steel structural support. Treat 160° viewing angle and 3,840 Hz refresh as performance lines to include or exclude, then compare totals.

Sources used: EA-iFilm2 specs

Fix the quoted transparency first

Transparency should be a named quotation input, not a headline. The EA-iFilm2 source lists 95% high transparency and also states a transparency level of 90%–95%. Ask EagerLED to identify the figure that applies to the exact quoted configuration and to put it on the same line as the model, application and glass opening. If a proposal says only 95%, ask how that relates to the documented 90%–95% band for the build you are buying.

Transparency also changes what the buyer must accept visually. The same source describes the EA-iFilm2 as becoming nearly invisible when not in use, not obstructing natural lighting, remaining imperceptible from a distance, and leaving no visible installation traces. Our advice is to make an off-state and daylight appearance check part of the quotation acceptance terms, using the project’s own glass and viewing positions. That keeps a transparency claim tied to the actual installation rather than a showroom image.

Module thickness, weight and count drive coverage

The documented module line is approximately 2 mm thick and weighs about 1 kg. The source also says the lightweight and slim design places no burden on glass installations. A quotation should therefore state thickness per module, weight per module, module quantity and the total display area. Those items belong together because they describe the hardware being priced, not merely a product family.

The source describes a flexible film material that is soft and bendable and suitable for curved installations. Ask EagerLED to state the exact module dimensions and the module count for the quoted glass layout. For curved work, request a layout-specific module schedule; a flat-face module count does not establish a curved-layout quantity.

EA-iFilm2 quotation inputs and evidence to request

Self-adhesive glass mounting changes the support scope

The EA-iFilm2 is described as self-adhesive, with no splicing structure, and its self-adhesive design requires no steel structural support. It can be directly affixed to glass surfaces and directly pasted to a glass curtain wall. The quotation should state whether any steel structure, frame or support is included, excluded or priced separately. If a proposal adds a steel line, ask what that line supplies, because the documented design is direct affixing without steel structural support.

The same source lists glass curtain walls, glass railings, windows and shop windows as applications, and says the model can be directly affixed to glass or storefront windows. Ask EagerLED to confirm that the exact glass surface, mounting method and application are in the quoted scope, and to list any surface preparation, access or protection items that remain outside it. This is a written-scope question, not an installation instruction.

For an indoor glass quote, keep service and spares as separate lines. The supplied EA-iFilm2 description establishes the direct-affixing mounting concept; it does not settle how a particular installed module is reached for replacement. Ask how modules, power and data are accessed after mounting, whether spare modules are included or quoted separately, and which clearance or access assumptions apply to the actual glass wall.

Fix performance lines before comparing totals

The EA-iFilm2 source lists a high brightness of 2,000 cd/m², 16-bit grayscale and a high refresh rate of 3,840 Hz. It also lists a viewing angle up to 160°. These values should appear against the quoted configuration if they matter to the project. A total that omits them, or applies them only to a generic model description, is not yet comparable with one that names them for the ordered build.

Use the performance lines to frame acceptance rather than to rank suppliers. If the glass display will be filmed or photographed, ask for a camera test at the planned frame rate and shutter and confirm the configured refresh line. If the installation is seen from steep side positions, request a viewing-angle check against the documented 160° figure and the actual seating or walking positions. The quotation should state whether those checks are included or remain buyer-side items.

A practical approval sequence for an EA-iFilm2 quote

A workable sequence is to fix the glass opening and application first, then choose the transparency figure, then confirm the module line, then confirm the self-adhesive mounting scope, and only then compare totals. Use a compare LED screen quotes checklist so each offer answers the same rows. This order prevents a lower headline from looking better merely because it treats transparency, modules or mounting as optional.

Defer the purchase if the glass surface, curved geometry, viewing positions or service route are unresolved. The source supports indoor glass use and direct affixing, but the quotation still needs a written configuration for the actual site. Ask EagerLED to state which line is provisional and what information is required to close it. That is safer than comparing prices built on different assumptions about transparency, module count or mounting.

Glass scenarios and what to confirm

Buyer checklist

• Ask EagerLED to name the exact quoted transparency within the documented 90%–95% band before any total is compared.
• Require the module line to state approximately 2 mm thickness, about 1 kg weight, dimensions, quantity and total area for the glass opening.
• Confirm self-adhesive direct-to-glass mounting, no steel structural support, and whether any frame or support item is included or excluded.
• Confirm the application: glass curtain wall, glass railing, window or shop window, and request a layout-specific module schedule for curved glass.
• Put 2,000 cd/m² brightness, 16-bit grayscale, 3,840 Hz refresh and up to 160° viewing angle on the quoted configuration line.
• Separate service access, spare modules, control, freight and commissioning from the display line before comparing offers.

Frequently asked questions

Does EA-iFilm2 transparency need to be fixed before comparing quotations?

Yes. The source lists 95% high transparency and a transparency level of 90%–95%, so the quote should state the figure for the exact configuration. If one offer gives only a headline and another gives a range, fix the same transparency target first; otherwise the totals are not answering the same specification.

What module size details should an EA-iFilm2 quote include?

The supplied description documents approximately 2 mm thickness and about 1 kg weight per module. Ask the quotation to add module width, height, quantity and total coverage for the glass opening, plus how the module line matches the quoted EA-iFilm2 configuration.

Does an EA-iFilm2 quote need a steel structure line?

The source describes a self-adhesive design that requires no steel structural support and says the display can be directly affixed to glass surfaces or pasted to a glass curtain wall. Ask the quotation to state whether steel, frame or support items are included, excluded or priced separately, so the total reflects the documented mounting approach.

Should 160° viewing angle and 3,840 Hz refresh be in the quote?

They are documented EA-iFilm2 performance lines, along with 2,000 cd/m² brightness and 16-bit grayscale. If viewing position or camera capture matters, put them on the quoted configuration and ask what acceptance evidence is included. Otherwise a lower or higher total may not cover the same performance scope.

Can a flat EA-iFilm2 module count be used for curved glass?

The source describes the film as soft and bendable and suitable for curved installations, but a flat layout count does not establish the quantity for a curved build. Ask EagerLED for a layout-specific module schedule and confirm the curved glass mounting scope in writing.

What should remain separate from the EA-iFilm2 display line?

Ask for service access, spare modules, control, freight and commissioning to be itemized separately. The supplied EA-iFilm2 description covers indoor glass applications and direct glass affixing; it does not by itself list the commercial surrounding scope, so those lines should be confirmed rather than assumed.

Share your project requirements to request a quote.