How Should Buyers Plan Indoor Transparent LED Film on Curved Glass?

Quick answer

For an indoor transparent LED film on curved glass, start with EagerLED EA-iFilm2 when 90%-95% transparency and an approximately 2 mm, about 1 kg self-adhesive module fit the glass opening. The supplied evidence describes it as flexible and suitable for curved shapes, but does not state a bend radius. Ask EagerLED to confirm the exact radius, glass surface condition, layout-specific module count and service route before ordering.

Sources used: EA-iFilm2 specs; EA-Flex specs; EA-iFilm specs

Fix the curved-glass scope before choosing a film model

The first planning input is the glass itself, not the display headline. EagerLED describes the EA-iFilm2 as an indoor flexible film LED display that is highly flexible and suitable for curved shapes, and says the flexible film material is soft and bendable for curved installations. It also states that the model can be directly affixed to glass or storefront windows and pasted to a glass curtain wall. Those statements support curved indoor glass as an application, but they do not give a numeric bend radius. Our advice is to send EagerLED the measured glass radius, arc length, whether the curve is cylindrical or more complex, the glass substrate and its surface condition, and the mounting area. Ask for written confirmation that the exact EA-iFilm2 configuration is supported by that geometry.

Do not borrow a bending limit from a different flexible product. EagerLED documents a ≤45° bending limit for the EA-Flex indoor soft flexible module range, and that range uses magnetic attachment to a suitable metal support structure. That ≤45° figure belongs to EA-Flex modules; the supplied EA-iFilm2 evidence does not state that limit. Treat the EA-iFilm2 bend radius as an open item to be confirmed for the actual glass, not as a number inferred from another model. If the glass curve cannot be confirmed, defer the film selection rather than comparing prices built on an unverified geometry.

Compare EA-iFilm2 and EA-iFilm on the same glass opening

EagerLED documents two indoor transparent film options that share direct-to-glass mounting but differ in transparency and module format. The EA-iFilm2 model is listed at 90%-95% transparency with an approximately 2 mm module weighing about 1 kg. The EA-iFilm model is listed at 90% transparency with an approximately 5 mm thickness and 6 kg/m² weight. Both are described as pasted or affixed to glass. For a curved glass feature, transparency and module weight are the first comparison rows, but the comparison only becomes useful when the supplier states which configuration applies to the exact glass opening.

The visual outcome differs in other ways. The EA-iFilm2 product is described as becoming nearly invisible when not in use and as not obstructing natural lighting. EA-iFilm is described as a transparent film display that is invisible when not playing and leaves no trace of installation from a distance. It lists a 140° viewing angle, while the EA-iFilm2 model lists up to 160°. If side views matter on curved glass, ask for the viewing-angle basis for the exact configuration and check it against the real walking or seating positions.

EA-iFilm2 and EA-iFilm curved-glass comparison

Set module size, layout and self-adhesive mounting on the quotation

EA-iFilm2 is described as self-adhesive with no splicing structure and a self-adhesive design that requires no steel structural support. That supports a direct-to-glass mounting approach, but the quotation still needs the actual module line. The supplied evidence gives approximately 2 mm thickness and about 1 kg per module, but not the module width, height or count. Ask EagerLED to state module width, height, quantity, weight per module and total display area for the glass opening, plus the layout-specific module schedule for the curve. A flat-face count does not establish the quantity for a curved build. For quotation inputs, use an EA-iFilm2 quotation inputs checklist so transparency, module size and mounting scope are fixed before totals are compared.

EA-iFilm uses a different stated unit: about 5 mm thickness and 6 kg/m². Because one model is documented by module and the other by area, ask for a common comparison basis before judging loading or handling. Request the total weight for the proposed glass opening, how the film is positioned and fixed, and whether any frame or support item is included, excluded or priced separately. Our advice is to keep the display module line separate from support, control, freight and commissioning lines so the curved-glass scope is visible in every offer.

Match brightness, refresh and viewing angle to the glass location

EA-iFilm2 lists 2,000 cd/m² brightness, 16-bit grayscale and 3,840 Hz refresh. EA-iFilm lists 5,000 cd/m² brightness, a 2,000:1 contrast ratio and 3,840 Hz refresh. These are documented model lines, not a ranking. The relevant buying question is what the glass location requires when the display is on and how the glass should look when it is off. Ask for a content sample or brightness acceptance condition at the intended indoor light level, and keep the quoted brightness line tied to the exact film model and configuration.

Viewing angle is separate from brightness. EA-iFilm2 lists up to 160°, while EA-iFilm lists up to 140° vertical and horizontal. On a curved glass wall, the audience may approach from an arc rather than a single frontal position. Request a viewing-angle check against the documented figure for the model being quoted and the real positions where people will stand or walk. If the installation will appear on camera or smartphone video, ask for a camera test at the planned capture settings rather than treating the refresh line by itself as proof of a clean capture.

Plan service, spares and acceptance before ordering

The supplied EA-iFilm2 and EA-iFilm descriptions cover the display surface and direct glass mounting, but they do not set out a service route, spare-module package, control scope or commissioning scope. Ask how a module is reached after it is affixed to the curved glass, whether replacement modules are quoted separately and how they are matched to the ordered module. For a curved build, a spare module from a flat layout may not match the installed shape, so request a spare-module line tied to the quoted configuration.

Acceptance should also be written before shipment. Use the glass opening and curved geometry as the reference, and agree what will be checked for transparency, brightness, viewing angle, refresh and module fit. Keep service access, spare modules, control, freight and commissioning as separate written lines. If any of those items remain unresolved, treat the film quotation as provisional rather than comparing totals that assume different scopes.

A practical buying sequence for curved indoor glass

A workable sequence is to fix the glass radius and arc first, then confirm whether EA-iFilm2 or EA-iFilm is the intended film, then request a layout-specific module schedule, then confirm transparency, module weight and mounting scope, then set the performance and acceptance lines, and only then compare totals. Use a compare LED screen quotes checklist so each offer answers the same rows. This order keeps the curved-glass scope ahead of commercial comparison.

Defer the purchase if the glass surface, curved geometry, module count or service route is unresolved. The supplied evidence supports indoor film use on glass, including curved installations, but it does not establish a bend radius or service method for every curved glass project. Ask EagerLED to state which quotation line is provisional and what information is needed to close it. That is more reliable than accepting a flat-glass price for a curved glass opening.

Curved-glass scenarios and what to confirm

Buyer checklist

• Provide the measured glass radius, arc length and a drawing or photo of the curve for the exact glass opening.
• Request a layout-specific module schedule for the curve; do not use a flat-face module count for the curved glass opening.
• Name the exact transparency figure within 90%-95% for EA-iFilm2 or the 90% figure for EA-iFilm.
• Normalise the weight line: approximately 1 kg per EA-iFilm2 module versus 6 kg/m² for EA-iFilm, and ask for total weight for the opening.
• Confirm self-adhesive direct-to-glass mounting and state whether any frame, support or surface preparation is included or excluded.
• Put brightness, viewing angle, refresh and service or spare-module lines on separate written rows tied to the quoted model.

Frequently asked questions

Does EA-iFilm2 have a stated bend radius for curved glass?

The supplied EA-iFilm2 evidence describes flexible film suitable for curved installations and direct affixing to glass, but it does not state a bend radius. Ask EagerLED to confirm the exact radius and the layout-specific module configuration for the glass opening before ordering.

Can I use the EA-Flex ≤45° bending limit for EA-iFilm2?

No. The ≤45° bending limit is stated for the EA-Flex indoor flexible module range, which uses magnetic attachment to a suitable metal support structure. EA-iFilm2 is a separate transparent film model, and the supplied EA-iFilm2 evidence does not state that limit. Treat the two bending questions separately.

How should I compare EA-iFilm2 and EA-iFilm weight for curved glass?

EA-iFilm2 is documented at approximately 2 mm thickness and about 1 kg per module. EA-iFilm is documented at about 5 mm thickness and 6 kg/m². Ask for module count, module dimensions and total weight for the exact curved glass opening so the two models are compared on the same basis.

What transparency should I fix in a curved transparent film quotation?

For EA-iFilm2, ask for the exact quoted figure within the documented 90%-95% range. For EA-iFilm, the supplied figure is 90%. Put the selected figure on the same quotation line as the model and glass opening so offers can be compared like for like.

What service questions should I ask for a curved transparent LED film?

Ask how a module is reached after it is affixed to the curved glass, how replacement modules are matched to the ordered configuration, and whether spare modules are included or priced separately. The supplied descriptions cover the display surface and direct mounting; the service route should be confirmed in writing for the exact glass wall.

Should an indoor transparent film on curved glass include a steel structure?

The EA-iFilm2 source describes a self-adhesive design that requires no steel structural support and says the display can be directly affixed to glass surfaces. Ask the quotation to state whether any steel, frame or support item is included, excluded or priced separately, and confirm the mounting scope for the actual glass.

Share your project requirements to request a quote.