How to Budget Spare Modules for a Four-Sided 3D LED Poster

Quick answer

Budget EA3DiP1 spares as separate lines for the exact P1.25, P1.56 or P1.86 pitch and for the flexible corner modules that form the continuous 360° corners. The model is front-service with caster mobility and 600 cd/m², but the supplied page lists no spare-module price. Request a written quotation that names the spare module, corner repair and pitch.

Sources used: EA3DiP1 specs; EA640H1 specs

Budget by exact pitch and corner module

The EA3DiP1 is an indoor four-sided 3D LED poster for commercial deployments in shopping malls, exhibitions, theater lobbies and branded retail spaces. It uses flexible LED modules to form continuous corners across its 680 × 680 × 1,920 mm cabinet, supports 360° visibility and a 170° viewing angle, and offers P1.25, P1.56 or P1.86 pixel pitch. A spare-module budget that names only a generic poster spare does not identify which pitch or which corner component is being replaced. For the EA3DiP1 four-sided 3D LED poster, start the spare line with the exact pitch and with the flexible corner modules that wrap the vertical edges.

Every EA3DiP1 configuration is listed with 600 cd/m² brightness, 10,000:1 contrast, 16-bit grayscale and a 3,840 Hz refresh rate, so a spare from the wrong pitch would not match the quoted visual configuration. The display has front-service module access, which lets technicians inspect, maintain or replace modules without rear service clearance. Use a spare module order method to record the model, pitch, module size, corner-module type and quantity beside the price line. The supplied page also recommends confirming viewing distance, content perspective, floor loading, power, signal routing and maintenance access before production; those checks belong in the project record before the spare quantity is frozen.

Keep spare modules as a separate quotation line

EagerLED’s EA640H1 quote guidance asks buyers to send wall width, height, viewing distance, preferred pitch and delivery address, and to request an itemized quote covering cabinets, controller, spare modules and freight. Apply that line-item discipline to an EA3DiP1 order: ask for the display, control system, spare modules, corner-repair components and delivery to appear separately. The goal is to make the EA3DiP1 four-sided quote scope visible rather than hiding spares inside a single poster price. The supplied EA640H1 page notes that price depends on pixel pitch, wall size, cabinet quantity, control system, spare modules and shipping, so the spare line is a real budget variable.

The EA3DiP1 page describes front-service module access, caster wheels and a 125 kg unit, which matters for how spares are stored and deployed. It also lists remote monitoring, scheduled power on/off and wireless content management from a mobile device, subject to the configured control system. A spare-module quotation should therefore state whether the replacement is a pixel-pitch-matched module, a flexible corner module or both, and whether the removal tool and access method are included. Use a compare LED screen quotes method so each offer shows the same spare, tool and freight lines.

Spare budgeting decisions and evidence to request

Match spare modules to pitch and finish

EagerLED’s EA640H1 page advises ordering spares in the same pitch to keep brightness and colour even. That is a model-specific instruction for EA640H1, but the underlying buying discipline applies to any pitch-based display: a spare should match the quoted pixel pitch and module type rather than being a generic replacement. For EA3DiP1, separate the spare request into P1.25, P1.56 and P1.86 lines if the venue may operate more than one pitch, and add a distinct line for the flexible corner modules that form the continuous 360° corners.

The EA3DiP1 is an indoor cabinet for close-range commercial installations rather than outdoor billboard deployment. Its naked-eye 3D effect depends on content prepared with the correct perspective for the installation viewing zones. A spare corner module or replacement module should match the exact quoted configuration; request written confirmation that the spare matches the quoted pitch, module type and corner geometry. Keep the corner-repair line separate from the standard flat-module line, because the corner modules are the components that wrap the four vertical edges.

Set spare quantity from service risk, not a copied ratio

The supplied EA3DiP1 page lists product features and pitch options but no recommended spare ratio. That means the budget cannot be set from a published percentage; it has to follow the deployment pattern. A single indoor poster in a mall atrium, a touring exhibition unit and a multi-unit retail rollout have different exposure to module damage, corner wear and transport handling. The EA3DiP1 has front-service access and caster wheels, which supports indoor repositioning between locations, but the same mobility means the unit may be moved more often than a fixed wall. Use the spare-parts inventory method to plan storage, labeling and reorder points rather than ordering a round number with no service plan.

A practical decision rule is to hold at least one matched spare module per active pitch and at least one flexible corner module for the corner geometry, then adjust upward where the venue has no quick service access or where a dark module would be unacceptable during a promotion. That is our advice, not an EagerLED requirement. Defer the final quantity until the exact pitch, corner-module type, module removal tool, storage location and service-response expectation are confirmed. If the order includes multiple EA3DiP1 units, confirm whether they share the same pitch and control configuration before treating one spare pool as sufficient.

Scenario planning for EA3DiP1 spare modules

Buyer checklist

• Name the exact EA3DiP1 pitch P1.25, P1.56 or P1.86 and put flexible corner modules on separate spare lines.
• Request a written spare-module and corner-repair quotation rather than accepting a blended poster price.
• Confirm front-service module access and the module removal tool for the quoted EA3DiP1 configuration.
• Record caster mobility and 125 kg unit weight in the storage and transport plan for spares.
• Compare offers on the same pitch, module type, corner module and freight inclusions.

Frequently asked questions

Does EagerLED publish a spare-module price for the EA3DiP1?

The supplied EA3DiP1 page passages list product features and pitch options but no spare-module price. Treat the spare-module line as a quotation request: ask for a written price for the exact P1.25, P1.56 or P1.86 module and for the flexible corner-module repair component.

Which spare modules should an EA3DiP1 order include?

Match spares to the exact EA3DiP1 pitch from P1.25, P1.56 or P1.86, and include the flexible corner modules that form the continuous 360° corners. Request a written confirmation that the spare matches the quoted pitch, module type and corner geometry. If the venue may operate more than one pitch, keep each pitch on its own spare line.

Can EA640H1 spare guidance be applied to EA3DiP1?

The EA640H1 page advises ordering spares in the same pitch to keep brightness and colour even, and it asks for an itemized quote covering cabinets, controller, spare modules and freight. That guidance is model-specific to EA640H1. For EA3DiP1, use the same line-item discipline but confirm the exact P1.25, P1.56 or P1.86 pitch and flexible corner module in writing.

How many spare modules should a buyer budget for an EA3DiP1?

The supplied passages do not give a spare ratio for EA3DiP1. Our advice is to start with at least one matched spare module per active pitch and one flexible corner module, then adjust upward for touring, frequent repositioning or promotional periods where a dark module would be unacceptable. Confirm the final quantity with the supplier.

What should the spare-module quotation show for a four-sided poster?

Ask for separate lines for the exact pitch, flexible corner modules, module removal tool, storage arrangement, freight and control components. The EA3DiP1 has front-service access and caster wheels, and weighs 125 kg, so the quotation should also state how the spares are handled and stored between indoor locations.

Share your project requirements to request a quote.