EA1000TiF2 vs EA1000TOF2 vs EA1000TOR1: Which Transparent LED Screen Fits the Installation?

Quick answer

For a permanent outdoor facade, EA1000TOF2 is the documented fixed outdoor transparent screen. For an indoor window or glass wall, EA1000TiF2 is the fixed indoor option. For temporary outdoor events and rental builds, EA1000TOR1 is the documented rental transparent screen. Start with exposure and installation life, then confirm cabinet size, IP rating, transparency for the quoted pitch, brightness and service access.

Sources used: EA1000TOR1 specs; EA1000TOF2 specs; EA1000TiF2 specs

Start With Installation Life and Exposure

For a fixed outdoor facade, EA1000TOF2 is the documented fixed outdoor transparent screen, described for facade and architectural display installations. For a fixed indoor window or glass wall, EA1000TiF2 is the documented fixed indoor transparent screen for retail windows, glass walls, showrooms and commercial interiors. For temporary outdoor events, EA1000TOR1 is the documented outdoor rental transparent screen for rental events and temporary builds. This scope split should come before brightness or transparency comparisons. For a closer fixed-only comparison, see our fixed transparent screen choice.

Installation life changes the question. A fixed screen is planned around permanent structure, service access and local climate. A rental screen is planned around repeated handling, transport, setup and dismantling. The supplied evidence describes EA1000TOF2 for fixed outdoor facade work and EA1000TOR1 for outdoor rental events, curved backdrops and square column screens. If the project is permanent but you are considering a rental cabinet, treat permanent facade use as unconfirmed and ask the supplier for a written position.

IP Rating and Operating Conditions

The documented protection differs by model. EA1000TiF2 has an IP33 protection grade and is designed for fixed indoor use, with a published operating range of -20°C to +60°C. EA1000TOF2 is IP65-rated for outdoor use, uses fully sealed LED beads and silicone-encapsulated PCBs to support that rating, and has a specified operating temperature range of -20°C to +50°C. EA1000TOR1 has an IP65 dust and water protection rating for outdoor rental use. Request the quoted EA1000TOR1 cabinet’s operating range.

An IP rating does not replace a site review. Ask how the quoted cabinet achieves the rating, how the joints and cable entries are protected, and whether the rating applies to each exposed face in the installed orientation. For an indoor glass wall, IP33 is the documented indoor scope. For an outdoor facade or temporary event, the IP65 models are the documented starting points, but the operating range and the actual service route still need written confirmation.

Transparent LED Screen Comparison by Installation and Documented Scope

Transparency and Brightness by Quoted Configuration

Transparency is not one model-wide number for every pitch. EA1000TiF2 is documented at 60% transparency, and EA1000TOF2 is documented at 60% transparency. EA1000TOR1 lists 60% transparency for the P3.91-7.82 configuration, 70% for P10.4 and 80% for P15.6 in its specification table. For a rental wall, name the pixel pitch and request the transparency figure for that exact configuration. The open cabinet design of EA1000TOR1 is described as helping reduce wind resistance, improve airflow and preserve sightlines through the screen.

Brightness also needs configuration-level confirmation. EA1000TiF2 is documented with brightness up to 5000 cd/m². EA1000TOF2 lists 4500 cd/m², with available configurations providing 4500–5000 cd/m². For EA1000TOR1, request the brightness and refresh figures for the quoted pitch. EA1000TiF2 and EA1000TOF2 each document at least 3840 Hz refresh in the supplied evidence.

Viewing angle is documented for one model in this set. EA1000TiF2 lists a 140° viewing angle. Request the applicable viewing angle for EA1000TOF2 or EA1000TOR1 if viewers will sit or stand far off axis. Do not transfer the indoor model’s angle to an outdoor cabinet.

Cabinet Size, Weight and Build Shape

EA1000TiF2 offers 1000×1000 mm and 1000×500 mm cabinets; its 1000×1000 mm aluminum cabinet weighs 6.7 kg. EA1000TOF2 lists a 1000×1000 mm aluminum cabinet at 15.8 kg and approximately 80 mm thick, plus a 1000×500 mm cabinet at 8.5 kg and a 1000×750 mm cabinet at 12.5 kg. EA1000TOR1 uses a 1000×500 mm standard cabinet that is 80 mm thick and weighs 7.5 kg. These are cabinet hardware details for the named sizes, not mounting or load ratings.

Shape and handling separate the rental model. EA1000TOR1 has a high-precision curve lock design and supports curved setups. Its optional 500×500 mm bevel cabinets are compatible with the standard 1000×500 mm cabinets, and combining them can create square or column-shaped LED screens. If the rental layout uses the optional bevel cabinet, put that line into the EA1000TOR1 bevel cabinet quote rather than assuming a flat cabinet count covers the build. EA1000TOF2 and EA1000TiF2 are documented as fixed models; confirm any curved or corner requirement separately for the exact cabinet.

Service Access and Maintenance Route

EA1000TiF2 has an openable rear cover for rear-access maintenance, and its rear-access structure is designed for fixed indoor installations where maintenance is planned from behind the screen. EA1000TOF2 also uses rear-access maintenance; its openable rear cover gives technicians direct access to internal components, and the rear-service design is suited to fixed outdoor projects where the back of the cabinet remains accessible. EA1000TOR1 supports front and rear maintenance and can be stacked, hung or fixed.

Service access is a site condition. If the back of a fixed facade or indoor glass wall will be finished, sealed or unreachable, ask how the quoted cabinet would be serviced before accepting the configuration. Do not assume that front access is available on a fixed transparent screen merely because a rental cabinet offers it. State the installed orientation and the actual service side on the quotation.

Choose by Project Scenario

For a permanent outdoor facade with dust and rain exposure, EA1000TOF2 is the documented fixed outdoor starting point, subject to an accessible rear-service route and the quoted cabinet’s -20°C to +50°C operating range. For an indoor retail window, showroom or glass wall protected from weather, EA1000TiF2 is the documented fixed indoor starting point, with IP33, 60% transparency and either 1000×1000 mm or 1000×500 mm cabinets. For temporary outdoor events, EA1000TOR1 is the documented rental starting point, with IP65 protection, a 1000×500 mm cabinet and curve-lock capability.

Use an outdoor transparent rental specification method when the event design depends on pitch-specific transparency, weather protection and curve or column geometry. The main decision is not which model is best in general; it is which documented scope matches the installation life, exposure class and service route. If the project mixes fixed and temporary use, separate the permanent structure from the rental inventory and confirm each part with the supplier in writing.

Quotation and Acceptance Checks

Build the quotation around the decisions that change the delivered screen: model, cabinet size and quantity, transparency for the quoted pitch, configured brightness, IP rating basis, operating range, service route, control scope, spare modules and freight. For EA1000TOF2, the EA1000TOF2 quotation scope should name the selected cabinet size and its documented weight, the configured brightness within 4500–5000 cd/m², the IP65 basis and the rear-access assumption for the site.

Use a line-by-line method to compare LED screen quotes rather than a headline total. Keep mounting structure, control equipment, commissioning, spare modules and freight on separate lines so offers can be compared against the same inclusions. This is our purchasing advice, not a statement about EagerLED’s required format.

Before dispatch, record a factory acceptance test that checks the exact cabinet, transparency, brightness, protection rating, operating range and service-access configuration against the order. For EA1000TOR1, confirm the quoted pitch and its transparency figure, because the supplied table lists 60% for P3.91-7.82, 70% for P10.4 and 80% for P15.6. For EA1000TOF2, confirm whether the quoted configuration is the 4500 cd/m² value or a 4500–5000 cd/m² option. For EA1000TiF2, confirm whether the 1000×1000 mm or 1000×500 mm cabinet is supplied.

Common Mistakes and When to Defer

Do not select by brightness alone. EA1000TiF2 lists up to 5000 cd/m² and EA1000TOF2 lists 4500 cd/m² with configurations to 5000 cd/m², so headline brightness is close. The stronger separators in the evidence are exposure rating, operating range, cabinet format, handling, service access and, for EA1000TOR1, pitch-specific transparency. Do not treat a rental transparent cabinet as a permanent facade cabinet without written confirmation, and do not treat an indoor IP33 cabinet as an outdoor solution.

Defer the order if the site cannot provide a documented service route, if the destination temperature falls outside the quoted model’s range, or if the supplier will not name the exact cabinet size and configured brightness or transparency. Resolve those points before comparing commercial totals. If the installation is permanent, the shortlist should normally be EA1000TiF2 for protected indoor glass and EA1000TOF2 for a fixed outdoor facade. If the installation is temporary and outdoor, EA1000TOR1 is the documented rental scope.

Scenario Starting Points for EA1000TiF2, EA1000TOF2 and EA1000TOR1

Buyer checklist

• State the installation life and exposure first: fixed indoor, fixed outdoor or temporary outdoor rental.
• Confirm the quoted model’s IP rating, achievement basis and operating range: EA1000TiF2 IP33 and -20°C to +60°C; EA1000TOF2 IP65 and -20°C to +50°C; EA1000TOR1 IP65 with the operating range requested in writing.
• For EA1000TOR1, request transparency for the exact quoted pitch: 60% for P3.91-7.82, 70% for P10.4 and 80% for P15.6.
• Name the exact cabinet size, quantity and weight: EA1000TiF2 1000×1000 mm at 6.7 kg; EA1000TOF2 1000×1000 mm at 15.8 kg, 1000×750 mm at 12.5 kg or 1000×500 mm at 8.5 kg; EA1000TOR1 1000×500 mm at 7.5 kg.
• Confirm the service route and clearance in the installed orientation: EA1000TiF2 and EA1000TOF2 are rear-access, while EA1000TOR1 supports front and rear maintenance.
• Put control, spares, mounting, commissioning and freight on separate quotation lines, then define the factory checks before dispatch.

Frequently asked questions

Which transparent LED screen is the documented starting point for a permanent outdoor facade?

EA1000TOF2 is described as a fixed outdoor transparent LED screen for facade and architectural display installations. It is IP65-rated, maintains 60% transparency, has rear-access maintenance and a specified operating range of -20°C to +50°C. Confirm the selected 1000×1000 mm, 1000×750 mm or 1000×500 mm cabinet, its weight, the IP65 basis and the rear service route for the site.

Which transparent LED screen fits an indoor retail window or glass wall?

EA1000TiF2 is described as a fixed indoor transparent LED screen for retail windows, glass walls, showrooms and commercial interiors. It provides 60% transparency, IP33 protection, 1000×1000 mm and 1000×500 mm cabinet options, a 6.7 kg 1000×1000 mm aluminum cabinet, up to 5000 cd/m² brightness and a 140° viewing angle. Confirm the rear-access route and the exact cabinet for the opening.

When should a buyer choose EA1000TOR1 instead of a fixed transparent screen?

EA1000TOR1 is described as an outdoor rental transparent LED screen for rental events and temporary builds. It uses a 1000×500 mm standard cabinet that is 80 mm thick and weighs 7.5 kg, has IP65 protection, a high-precision curve lock and optional 500×500 mm bevel cabinets. Choose it when the display must be transported, set up and dismantled, not as a confirmed permanent facade option.

Is transparency the same across EA1000TiF2, EA1000TOF2 and EA1000TOR1?

EA1000TiF2 and EA1000TOF2 each list 60% transparency. EA1000TOR1 is pitch-specific in the supplied table: 60% for P3.91-7.82, 70% for P10.4 and 80% for P15.6. Always request the transparency figure for the exact quoted pitch and configuration rather than relying on one model-wide number.

How does service access differ among the three transparent LED screens?

EA1000TiF2 has an openable rear cover and rear-access maintenance for fixed indoor installations where service is planned from behind. EA1000TOF2 has rear-access maintenance with an openable rear cover and is suited to fixed outdoor projects where the back remains accessible. EA1000TOR1 supports front and rear maintenance. Confirm the actual service route for the installed orientation.

Share your project requirements to request a quote.