EA1000TOF2 vs EA1000F2: Transparent or Standard Outdoor LED Cabinet for a Fixed Facade

Quick answer

Choose the EA1000TOF2 for a fixed facade that must stay visually open: the supplied evidence documents a 1000 x 1000 mm cabinet, IP65, 60% transparency, 4,500-5,000 cd/m2 configurations and rear-access maintenance. Choose the EA1000F2 for a standard fixed outdoor advertising face with front or rear service, 5,000 or 6,500 cd/m2 brightness, P2.97-P10.42 pitch options and optional corner geometry. Confirm the quoted pitch, configured brightness and service route for the exact cabinet.

Sources used: EA1000TOF2 specs; EA1000F2 specs; EA960F4 specs

Transparency and the Facade Sightline

The EA1000TOF2 is documented as a fixed outdoor transparent LED screen for facade and architectural display installations, and its source describes it for projects that need high brightness without completely blocking the view behind the screen. It carries a 60% transparency figure, with the design described as maintaining unobstructed outdoor views and environmental transparency. If the facade must keep showing glazing, interior activity or a building feature behind the screen, that documented transparency is the first filter to apply before brightness or price is debated.

The EA1000F2 belongs to a different product scope in the supplied evidence: a fixed outdoor advertising LED screen for commercial buildings, roadside billboards and large-format digital signage, with IP65 protection for outdoor installation and front and rear module service. The supplied EA1000F2 passages do not document a transparency figure, so do not assume a standard fixed outdoor advertising cabinet will read like a transparent one on the same wall. State the sightline requirement in the brief first, then ask the supplier to describe the quoted cabinet face in writing.

Brightness, Pixel Pitch and Content Fit

Brightness and refresh differ between the two documented scopes. EA1000TOF2 available configurations provide 4,500-5,000 cd/m2 brightness and a refresh rate of at least 3,840 Hz. EA1000F2 models deliver 5,000 or 6,500 cd/m2 brightness, a refresh rate of at least 3,840 Hz, 16-bit grayscale and a 140 degree viewing angle. Treat those as option ranges for the named models rather than a promise about the cabinet you will receive: ask the supplier to name the configured brightness and refresh for the exact cabinet and pitch in the quotation.

Pixel pitch is documented in detail for one model only. EA1000F2 offers seven pixel-pitch configurations from P2.97 to P10.42, and the source states those options let specifiers balance image detail, viewing distance and project budget. The supplied EA1000TOF2 passages do not list pixel-pitch configurations for the transparent cabinet, so request the quoted pitch, module layout and pixel density rather than inferring them from the series description. A pixel pitch and viewing distance check against the actual street positions is a sensible way to frame that request for a fixed facade.

EA1000TOF2 and EA1000F2 fixed facade comparison

Cabinet Formats, Weight and Corner Geometry

For the same nominal 1000 x 1000 mm size, the documented weights differ. The EA1000TOF2 aluminum cabinet is listed at 15.8 kg and approximately 80 mm thick, with smaller options listed at 8.5 kg for 1000 x 500 mm and 12.5 kg for 1000 x 750 mm. The EA1000F2 1000 x 1000 mm aluminum cabinet is listed at 28.4 kg, with quick locks and positioning posts for aligning adjacent cabinets and module safety tethers for secondary retention during installation and service. Give those documented figures to the structural professional for the exact cabinet and quantity, and do not carry one model’s weight into the other model’s structural review.

Geometry options also differ. EA1000F2 is built on a 500 x 250 mm module platform that supports six cabinet formats: 1000 x 500, 1000 x 750, 1000 x 1000, 1500 x 500, 1500 x 750 and 1500 x 1000 mm. Optional 45 degree beveled-edge cabinets are available in three sizes and pair to form a 90 degree outside corner for building corners and right-angle advertising displays where content must continue across two faces. Optional 90 degree curved cabinets are available in three sizes for rounded-corner installations, and the curved surface can support wraparound content and glasses-free 3D campaigns when the content is produced for the planned viewing position. The supplied EA1000TOF2 passages document 1000 x 1000 mm, 1000 x 750 mm and 1000 x 500 mm cabinets but do not document corner or curved transparent cabinet options, so if the facade turns a corner, ask whether a corner arrangement is offered for the quoted transparent cabinet before assuming a flat layout will wrap.

Service Access and Rear Clearance

EA1000F2 LED modules can be installed and removed from either the front or the rear of the cabinet, and the dual-service design is described as letting technicians choose the access method that fits the site, including wall-mounted projects with limited rear clearance and structures with dedicated rear service space. That dual route is the more flexible documented starting point for a facade where rear clearance is uncertain. Confirm the route for the exact cabinet and installed orientation rather than assuming the series description covers your wall section.

EA1000TOF2 uses rear-access maintenance: its openable rear cover gives technicians direct access to internal components, and the source ties that rear-service design to fixed outdoor projects where the back of the cabinet remains accessible. On a building facade, that is a site condition rather than a cabinet guarantee. If the screen would sit against a finished wall, a glazed curtain wall with no service corridor, or a high-level position with no safe rear reach, clarify the intended maintenance route before accepting the configuration. Ask how modules, power and control components would be reached, and whether any documented alternative to rear access applies to the quoted transparent cabinet.

Weather Protection, Temperature and Cooling

Both products carry an IP65 rating in the supplied evidence, but the basis differs. EA1000TOF2 achieves IP65 with fully sealed LED beads and silicone-encapsulated PCBs, and its specified operating temperature range is -20 degrees C to +50 degrees C. EA1000F2 documents IP65 protection for outdoor installation, and published configurations list AC 90-264 V input and a -20 to +60 degrees C working-temperature range, with the source stating that final electrical design should follow the selected model and local requirements. Pass the exact quoted figures to the electrical designer rather than a series summary.

The documented cooling descriptions differ. EA1000F2 uses aluminum module baseplates and vortex cooling fans to move heat away from the LED modules, with the power supply mounted directly against the cabinet door panel using thermal paste to create a defined heat-transfer path for outdoor operation. For EA1000TOF2, the source states that its 60% transparency design improves heat dissipation while maintaining unobstructed outdoor views. For a fixed facade, ask the supplier how the quoted cabinet manages heat in the installed orientation and what the written thermal description is for the exact configuration; that is a buyer question, not a claim that either cabinet follows a particular airflow path.

Quotation and Acceptance Evidence to Request

Build the quotation around the decisions that change the delivered screen: model, cabinet size and quantity, pixel pitch, configured brightness, refresh, transparency where applicable, IP65 basis, operating range, service route, control scope, spare modules and freight. For EA1000TOF2, the EA1000TOF2 quotation scope should name the cabinet size and its documented weight, the configured brightness within the 4,500-5,000 cd/m2 range, the IP65 basis and the rear-access assumption for the site.

For EA1000F2, the quotation should name which of the six cabinet formats is priced, whether an optional 45 degree beveled-edge or 90 degree curved cabinet is in scope, the selected pixel pitch from P2.97 to P10.42, and whether brightness is the 5,000 or the 6,500 cd/m2 option. If rear clearance is limited, ask which documented service route applies to the quoted cabinet, and keep mounting, control, commissioning, spare modules and freight on their own quotation lines so competing offers can be compared against the same inclusions.

If neither 1000 mm platform suits the structural layout, a second fixed outdoor option is documented: the EA960F4 uses a 960 x 960 mm cabinet with IP65 protection and front and rear maintenance, with five pixel pitches from P4.44 to P10. Compare it on the same cabinet size, pitch, brightness and service questions rather than treating it as a substitute for confirming the original configuration.

Fixed facade scenarios and what to confirm

Buyer checklist

• State whether the facade must remain visually open. EA1000TOF2 is documented at 60% transparency for facade and architectural installations, while the supplied EA1000F2 passages do not document a transparency figure.
• Name the exact cabinet and quantity, then give the structural professional the documented weight: 15.8 kg for the EA1000TOF2 1000 x 1000 mm cabinet and 28.4 kg for the EA1000F2 1000 x 1000 mm cabinet.
• Request configured brightness and refresh for the quoted cabinet. EA1000TOF2 configurations provide 4,500-5,000 cd/m2, while EA1000F2 models deliver 5,000 or 6,500 cd/m2, both at not less than 3,840 Hz.
• Confirm the quoted pixel pitch. EA1000F2 lists seven configurations from P2.97 to P10.42, while the supplied EA1000TOF2 passages do not list pitch configurations.
• Confirm the service route for the installed orientation. EA1000F2 documents front and rear module service, while EA1000TOF2 documents rear-access maintenance where the back of the cabinet remains accessible.
• Match the site conditions to the quoted figures: EA1000TOF2 is specified at -20 to +50 degrees C and EA1000F2 published configurations list -20 to +60 degrees C, with final electrical design following the selected model and local requirements.

Frequently asked questions

Is the EA1000TOF2 bright enough for a sunlit building facade?

EA1000TOF2 available configurations provide 4,500-5,000 cd/m2 brightness with a refresh rate of at least 3,840 Hz, and the model is described for projects needing high brightness without completely blocking the view behind the screen. EA1000F2 models deliver 5,000 or 6,500 cd/m2 depending on configuration. Ask the supplier to name the configured brightness for the exact cabinet and pitch, then judge the intended content in daylight at the real viewing positions.

Can the EA1000F2 be made see-through like a transparent screen?

The supplied EA1000F2 passages do not document a transparency figure for this fixed outdoor advertising screen. EA1000TOF2 is documented at 60% transparency and is described for facade and architectural installations that keep the view behind the screen visible. If a see-through effect is required, ask the supplier to confirm any view-through property of the quoted cabinet in writing rather than assuming the standard fixed outdoor advertising cabinet behaves like the transparent one.

What pixel pitch is available for the EA1000TOF2?

The supplied EA1000TOF2 passages document cabinet size, weight, transparency, brightness and refresh, but they do not list pixel-pitch configurations. EA1000F2, by contrast, lists seven configurations from P2.97 to P10.42. Request the quoted pitch and module layout for the transparent cabinet, and test the planned content at the intended pedestrian and vehicle viewing positions before ordering.

How is an EA1000TOF2 serviced on a facade with no rear access?

EA1000TOF2 uses rear-access maintenance: an openable rear cover gives technicians direct access to internal components, and the source ties the design to fixed outdoor projects where the back of the cabinet remains accessible. If no rear route exists at the facade, ask the supplier how the installed screen would be maintained and what access arrangement is proposed before accepting the configuration.

Which of the two models fits a facade corner or a curved return?

EA1000F2 documents optional 45 degree beveled-edge cabinets that pair to form a 90 degree outside corner and optional 90 degree curved cabinets for rounded-corner installations, with the curved surface able to support wraparound content and glasses-free 3D campaigns when content is produced for the planned viewing position. The supplied EA1000TOF2 passages describe flat cabinet sizes without corner or curved options, so confirm availability for the quoted cabinet if the facade turns.

Does the operating temperature range change the selection?

The documented ranges differ: EA1000TOF2 is specified at -20 to +50 degrees C, while EA1000F2 published configurations list a -20 to +60 degrees C working range, and the source states final electrical design should follow the selected model and local requirements. Match the quoted range and IP65 basis to the facade location and season, and treat any wider range as something to confirm for the exact cabinet rather than a series assumption.

Share your project requirements to request a quote.