Quick answer
For a solid finished wall, choose EA250WH5 when its 30 mm front-service cabinet fits the mounting depth and permanent indoor video wall. For suitable indoor glass where daylight and view-through matter, choose EA250INV and confirm the exact transparency within the documented 70% to 90% range for the selected pixel pitch and configuration. Confirm the actual surface, layout, pitch, brightness and service route in writing before ordering.
Sources used: EA250WH5 specs; EA250INV specs
Decide by Mounting Surface First
The first decision is the mounting surface. For a solid finished wall, the EA250WH5 is a 30 mm ultra-thin indoor LED display wall documented for space-limited permanent video walls. Its scope is a solid cabinet wall, not a see-through surface. If the wall must remain glass and the display must be discreet when off, that is a different configuration question.
EA250INV is documented as an indoor invisible LED film display for glass walls and storefronts. It combines up to 90% transparency with a 2 mm profile, preserving natural light and interior visibility. On a solid wall, that transparency is unnecessary; on a glass storefront, it is often the reason the film is shortlisted.
EA250WH5 on a Solid Wall: Depth, Service and Layout
The EA250WH5 cabinet is 30 mm deep and is described as mounting almost flush to a finished wall, so the opening needs no deep recess. Modules, power supplies and control components are reachable from the front with a suction tool, so no maintenance aisle is needed behind the wall. Each module mates to a direct HUB, so power and data reach it without separate power cords or ribbon cables. The documented mounting methods are wall-mounted, suspended or fixed around a structural column, and one cabinet family builds flat walls, right-angle corners and column wraps.
Six cabinet formats are available from 500 × 250 mm up to 1000 × 500 mm, all using the same 250 × 250 mm module: 500, 750 and 1000 mm wide cabinets in 250 mm or 500 mm heights. Seven pitches run from P1.25 GOB to P3.91. The 250 mm-high formats weigh 3.0 to 5.7 kg, while the 500 mm-high formats weigh 5.3 to 10.5 kg. Documented brightness is 600 cd/m² on P1.25 and P1.56 and 750 cd/m² from P1.95 to P3.91, with a 160° viewing angle, 14/16-bit grayscale options and at least 3,840 Hz refresh.
EA250WH5 and EA250INV decision comparison
| Decision | EA250WH5 solid wall | EA250INV glass film | What to request |
|---|---|---|---|
| Mounting surface | EA250WH5 is a 30 mm indoor LED display wall for space-limited permanent video walls. | EA250INV is an indoor invisible LED film display for glass walls and storefronts. | Request written confirmation that the actual solid wall or indoor glass surface suits the quoted model and mounting scope. |
| Depth and module | Cabinet is 30 mm deep and uses a 250 × 250 mm module across six cabinet formats from 500 × 250 mm to 1000 × 500 mm. | Module is 2 mm thick and approximately 1.3 to 1.5 kg, with 1000 × 250 mm, 1200 × 250 mm and 1500 × 250 mm sizes. | Request a cabinet or module map for the actual opening, including edge and corner treatment. |
| Transparency | Solid opaque wall; no transparency figure is documented for this model. | Up to 90%, with a documented 70% to 90% range by pixel pitch and configuration. | Request the exact quoted transparency for the selected EA250INV pitch and configuration. |
| Pixel pitch | Seven pitches from P1.25 GOB to P3.91. | P3.91, P6.25 and P10.42, with pixel densities from 9,216 to 65,536 pixels/m². | Request the pitch tied to the closest regular viewer and the smallest content detail. |
| Brightness | 600 cd/m² on P1.25 and P1.56; 750 cd/m² from P1.95 to P3.91. | Configurations provide 1,500 to 4,500 cd/m². | Request the operating brightness preset and a test at the actual room or storefront light level. |
| Service access | Front access for modules, power supplies and control components with a suction tool; no rear maintenance aisle. | Service route after direct glass mounting is not covered by the supplied performance lines. | Request the removal method, working clearance and spare-module match for the quoted configuration. |
| Indoor boundary | IP31 rated for indoor use, working temperature -20 °C to +60 °C, and not suitable for outdoor use. | Described for indoor glass installations such as retail windows, malls and showrooms. | Confirm indoor use and the exact application before ordering. |
EA250INV on Glass: Transparency, Modules and Mounting
EA250INV transparency is up to 90%, but the documented range is 70% to 90% by pixel pitch and configuration. Modules are 2 mm thick and weigh approximately 1.3 to 1.5 kg depending on module size. Three module sizes are listed: 1000 × 250 mm, 1200 × 250 mm and 1500 × 250 mm, with combinations varying by pixel pitch. A pitch and transparency selection method should start from the glass opening. The film mounts directly to suitable indoor glass surfaces without a conventional steel support frame, and it is documented for retail windows, shopping malls, exhibition halls, museums, showrooms and creative commercial displays.
EA250INV supports P3.91, P6.25 and P10.42 pixel pitches, with pixel densities from 9,216 to 65,536 pixels/m². Configurations provide brightness from 1,500 to 4,500 cd/m², contrast ratio up to 9,000:1, 16-bit grayscale, at least 3,840 Hz refresh and a 140° viewing angle.
Compare Service, Brightness, Pitch and Viewing Angle
Service access is a clear difference. EA250WH5 documents front access for modules, power supplies and control components, with no rear maintenance aisle. For EA250INV, ask how modules, power and data are reached after direct glass mounting. A brightness acceptance check should be agreed for the actual room or storefront light level rather than relying on a headline figure.
Pitch and viewing angle separate the two options. EA250WH5 documents seven pitches from P1.25 GOB to P3.91 and a 160° viewing angle. EA250INV documents P3.91, P6.25 and P10.42 and a 140° viewing angle. Higher EA250INV brightness, listed at 1,500 to 4,500 cd/m², is not an automatic selection rule; confirm the operating preset for the exact configuration and the closest viewer.
Quotation Scope and Surface Confirmation
A useful offer should separate the exact model, solid or film format, cabinet or module dimensions, pixel pitch, transparency for EA250INV, brightness, viewing angle, refresh, mounting scope, service route, spare modules, control, freight and commissioning. Use a compare LED screen quotes method so each supplier answers the same rows. EA250WH5 price depends on pixel pitch, wall size, cabinet quantity, control system, spare modules and shipping, and each wall is quoted per project after screen dimensions, viewing distance and delivery city are provided.
Keep indoor boundaries clear. EA250WH5 cabinets are rated IP31 for indoor use with a working temperature range of -20 °C to +60 °C, and the source states it is not suitable for outdoor use. EA250INV is described for indoor glass installations. Confirm the actual surface and indoor application for the quoted configuration rather than assuming suitability from the product family.
When to Choose Which, and When to Defer
Choose EA250WH5 when the surface is a solid finished wall, rear access is limited and a permanent video wall is required. Its documented scope includes front service, six cabinet formats, P1.25 GOB to P3.91, right-angle and column configurations, and wall, suspended or column mounting. Choose EA250INV when suitable indoor glass must stay visible and transparency matters. Its documented scope includes up to 90% transparency, 70% to 90% by pitch and configuration, P3.91, P6.25 and P10.42, and direct mounting on suitable glass.
Defer the final choice if the surface is not confirmed, the glass condition is unresolved, the EA250INV module and pitch map is not supplied, the closest viewer and content detail are not tested, or the service route is unanswered. For EA250WH5, also confirm the cabinet format, mounting method and indoor boundary. For EA250INV, confirm the exact transparency, module sizes and direct mounting scope in writing. Do not carry a solid-wall cabinet layout onto glass, or a film transparency figure onto a solid wall.
Scenario and confirmation
| Scenario | What to confirm |
|---|---|
| Solid 30 mm wall with no rear access | Confirm the EA250WH5 cabinet format, front-service tool and front clearance for the quoted layout. |
| Glass storefront where daylight must pass | Confirm EA250INV transparency within the 70% to 90% range for the selected pitch and configuration. |
| Close-up lobby content | EA250WH5 P1.25, P1.56 and P1.95 GOB are documented for about 2 m; request a small-text test at the nearest viewer position. |
| Larger retail room viewed from about 3 m | EA250WH5 P2.5 to P3.91 are documented for about 3 m and beyond; request the pitch for the actual content detail. |
| Glass wall with camera capture | EA250INV lists at least 3,840 Hz refresh; request a camera test at the planned capture settings. |
| Quote comparison | Request exact model, pitch, transparency, brightness, service route, spares, control, freight and commissioning on separate rows. |
Buyer checklist
- Confirm whether the surface is a solid finished wall or suitable indoor glass before comparing EA250WH5 and EA250INV.
- Request the exact cabinet or module map, pixel pitch, brightness and, for EA250INV, the transparency for the quoted configuration.
- Confirm service access: EA250WH5 documents front service with no rear maintenance aisle; for EA250INV ask how modules, power and data are reached after direct glass mounting.
- Put spare modules, control, freight and commissioning on separate quotation rows so offers can be compared on the same basis.
- Confirm the indoor boundary for the exact model; EA250WH5 is IP31 rated and not suitable for outdoor use, and EA250INV is described for indoor glass installations.
Frequently asked questions
Which is better for a solid 30 mm indoor wall, EA250WH5 or EA250INV?
For a solid finished wall, EA250WH5 is the relevant model because it is a 30 mm ultra-thin indoor LED display wall with front service and a solid cabinet format. EA250INV is documented for indoor glass walls and storefronts, not as a solid-wall substitute. Confirm the actual surface before selecting either.
Can EA250WH5 be mounted on glass?
The supplied EA250WH5 evidence documents wall-mounted, suspended and column installation for a 30 mm indoor LED display wall, but it does not document direct glass mounting. EA250INV is documented for direct mounting on suitable indoor glass surfaces without a conventional steel support frame. Ask the supplier to confirm the actual surface and mounting scope in writing.
How transparent is EA250INV?
EA250INV is documented up to 90% transparency, but the supplied range is 70% to 90% by pixel pitch and configuration. Request the exact transparency figure for the selected P3.91, P6.25 or P10.42 pitch and module combination, because a model-level headline is not enough for a glass wall decision.
What service access does EA250WH5 need?
EA250WH5 modules, power supplies and control components are reachable from the front with a suction tool, so the wall needs no maintenance aisle behind it. Each module mates to a direct HUB, so power and data reach it without separate power cords or ribbon cables. Confirm the front clearance and spare-module match for the quoted cabinet format.
What should be in the quotation for either option?
Ask for separate lines for the exact model, solid or film format, cabinet or module dimensions, pixel pitch, transparency for EA250INV, brightness, viewing angle, refresh, mounting scope, service route, spare modules, control, freight and commissioning. EA250WH5 price depends on pixel pitch, wall size, cabinet quantity, control system, spare modules and shipping, and each wall is quoted per project.
When should I defer the decision between EA250WH5 and EA250INV?
Defer if the mounting surface is not confirmed, the glass condition is unresolved, the EA250INV module and pitch map is not supplied, the closest viewer and content detail are not tested, or the service route is unanswered. For EA250WH5, confirm the cabinet format, mounting method and indoor boundary. For EA250INV, confirm transparency, module sizes and direct mounting scope.
Share your project requirements to request a quote.
Check the details
Sources & references
Source pages can change. Access dates record when they were consulted.
- EA250WH5 specs Accessed 30 September 2026
- EA250INV specs Accessed 1 October 2026
Put these details into your project brief.
Tell EagerLED the application, destination and screen dimensions you have in mind.
Request a project quote