EA576H1 vs EA500H9: Outdoor Rental LED Cabinet for a Touring Fleet

Quick answer

Compare documented scope, not cabinet size alone. EA500H9 outdoor covers P2.6–P4.81 at 3,000–6,000 cd/m² with IP65 front/IP54 rear protection, a -20 °C to +60 °C working range, 7.5 kg outdoor weight and a 250 mm module grid. EA576H1 outdoor covers P3.79/P4.8 at 4,500 cd/m² with IP65 front/IP54 rear protection, 8 kg weight and 288 mm modules. Both document front and rear service and optional curved locks. Confirm exact pitch, curve-lock inclusion, spares and service clearance in writing.

Sources used: EA500H9 specs; EA576H1 specs

Cabinet size, wall geometry and pitch range

Start with wall geometry because a 576×576 mm cabinet and a 500×500 mm cabinet create different increments before pitch is considered. The EA500H9 Rental LED Board is a 500×500 mm die-cast cabinet built from four 250×250 mm modules, and outdoor models cover P2.6 to P4.81. Its indoor stablemate covers P1.56 to P3.91. For a touring outdoor fleet, that outdoor pitch spread gives you close-camera options at P2.6 or P2.97 and large-wall options at P3.91 or P4.81, according to the supplied EA500H9 guidance. Cabinet rows follow the 500 mm cabinet increment, while the 250 mm module grid supports stepped or staggered creative shapes.

The EA576H1 Outdoor Rental LED Display is a 576×576 mm cabinet using 288×288 mm modules. It is offered in P3.79 or P4.8, with listed module resolutions of 76×76 and 60×60 pixels respectively, and P3.79 provides more pixels within the same cabinet size. That makes the EA576H1 a narrower outdoor pitch choice than the EA500H9 range: it can suit event walls where 576 mm increments and P3.79 or P4.8 detail fit the viewing plan. The supplied EA576H1 passages list P3.79 and P4.8 options, not P2.6 or P2.97. Plan wall dimensions in 576 mm increments; the source gives a 10-cabinet-wide row as 5.76 m.

Brightness, protection and camera-facing performance

Both families document outdoor protection, but the published ranges differ. EA576H1 lists 4,500 cd/m² brightness and at least 3,840 Hz refresh, with IP65 at the front and IP54 at the rear; the source notes the two sides have different ratings and says to check complete installation requirements for the venue. Both listed EA576H1 configurations also list 14-bit grayscale and a 140° viewing angle. For filmed events, test the actual camera, shutter and processor settings before the show rather than relying on the headline refresh figure.

EA500H9 outdoor models are documented at 3,000 to 6,000 cd/m² with IP65 front and IP54 rear protection, and the model range includes a -20 °C to +60 °C working range. Brightness runs from 3,000 cd/m² on the black-LED outdoor models to 6,000 cd/m² on EA500H9-OP3.91-8S. The refresh specification is at least 3,840 Hz with 14-bit grayscale and a frame rate of 60 Hz or more, which the source says supports broadcast and phone cameras recording a stable image without scan lines. If the show is camera-heavy, confirm the exact outdoor model and its brightness setting, then plan a camera test.

EA576H1 vs EA500H9 documented outdoor rental differences

Service access and spare-part standardisation

Both cabinets document front and rear service, which matters for a touring fleet because the wall may stay rigged between shows. EA500H9 uses magnet-mounted modules that lift from the viewing side, while the power box opens from the rear; the cabinet can be serviced with the wall still rigged, and the source says one failure need not stop the show. Its power supply and HUB board sit in a detachable rear box wired on a HUB connection rather than individual module cables, so the unit swaps without re-cabling the cabinet.

EA576H1 also documents front and rear service access, with magnetic LED modules for front access and a rear service route. Its rear power box and back cover are detachable, using a quick-release buckle and a HUB connection design. The EA576H1 source advises specifying compatible spare power supplies and receiving cards with the order, and confirming the supplied electronics and connection layout before ordering replacement parts because project configurations may differ. For fleet standardisation, request compatible spare modules, power supplies and receiving cards as one spare set so the quoted cabinet, module and control electronics match.

Curve hardware and repeatable geometry

EA576H1 offers an optional high-precision curved lock that allows cabinets to form an arc-shaped LED wall. The source says to request this option when ordering a curved stage backdrop and to confirm the supported angles and layout before finalizing the design; the curved lock is optional equipment, so it should appear on the quotation if the build needs it. Share the required screen width and curvature so the quotation includes the appropriate cabinet locks and accessories. This makes EA576H1 a reasonable candidate when the show needs an arc and the 576 mm cabinet increment fits the design.

EA500H9 uses optional high-precision arc locks that index each cabinet to a set angle, so a curve repeats at the same radius on the next build. Flat and curved sections can be mixed in one screen, and longer runs can be closed into a circle where the cabinet count allows. The source says to order the arc locks together with the cabinets. For a touring fleet that rebuilds the same curved backdrop across dates, that documented repeatability is the clearest differentiator in the supplied material. If the curve is one-off, compare the exact lock angle and layout evidence for each model rather than assuming compatibility.

Transport handling and fleet standardisation

Weight and handling hardware should be compared with the exact outdoor configuration. EA576H1 lists an 8 kg cabinet, with handles, fixing slots and quick locks to help crews position and connect panels; corner protectors help protect module edges during handling. EA500H9 outdoor cabinets list 7.5 kg, while indoor cabinets list 6.5 to 7 kg; the die-cast aluminium cabinets join on a 250 mm module grid, and the source describes outdoor cabinets as light enough for one person to lift and align on site. Those figures are close enough that loaded flight cases, rigging accessories and spare cabinets may change the transport plan more than the bare cabinet difference.

Fleet standardisation is about more than cabinet size. EA500H9 shares a 250 mm module grid across the H9 series, can be stepped or staggered into checkerboard and irregular shapes with the same quick-lock system, and its 500×500 mm cabinet bolts to the 500×1000 mm EA1000H9 horizontally and vertically. EA576H1 uses 288×288 mm modules and a 576×576 mm frame; the supplied passages do not document a 500×1000 mm mixed-splice partner for it. If your fleet already carries 500×500 mm or mixed H9 cabinets, the EA500H9 spare-part and layout story is more directly documented. If your events naturally fit 576 mm increments, EA576H1 keeps a single module format within that family.

Selection path for a touring outdoor rental fleet

A practical decision sequence is to define the outdoor exposure first, then wall geometry, then pitch. List whether the wall will be flat, curved, or mixed; measure the available width and height; mark the required cabinet increment; and decide whether the fleet needs P2.6/P2.97 close-camera work or P3.79/P4.8 large-wall work. Then compare the exact outdoor model’s brightness, IP rating, operating range, service route and curve-lock inclusion. That sequence keeps the decision tied to the venue and the crew’s build method rather than to a model name.

At quotation stage, separate cabinet, control, spare parts, rigging and freight so you can compare LED screen quotes on the same inclusions. That is our purchasing advice, not a manufacturer requirement. Ask for the exact model, pixel pitch, brightness, protection rating, operating range, curve-lock inclusion, module size and cabinet weight in writing. For EagerLED, an itemised request also lets you confirm whether the quoted cabinet supports the layout, service route and spares plan before the order is placed.

Touring fleet scenario decisions

EA576H1 ten-cabinet row length

Illustrative calculation: 10 × 0.576 = 5.76 m. Each EA576H1 cabinet is 576 mm wide; 10 cabinets are arranged in one row and 576 mm is converted to metres.

Buyer checklist

• Name the outdoor exposure and whether the wall is flat, curved or mixed before choosing a cabinet.
• List wall dimensions in the cabinet increment: 576 mm for EA576H1 and 500 mm for EA500H9.
• Request the exact outdoor pitch, brightness, front and rear protection rating and operating range for the quoted model.
• Confirm the front and rear service route, module removal tools, service clearance and compatible spare modules for the installed wall.
• Confirm optional curve-lock inclusion and the supported angle or radius for the exact model before finalizing the layout.
• Separate cabinet, control, spares, flight cases and freight in the quotation request so inclusions are visible.

Frequently asked questions

Which cabinet has the wider outdoor pitch range, EA576H1 or EA500H9?

EA500H9 outdoor models cover P2.6 to P4.81, while EA576H1 offers P3.79 or P4.8. If your touring content needs close-camera outdoor pitches, EA500H9 documents P2.6 and P2.97 options; the supplied EA576H1 passages list P3.79 and P4.8. Match the chosen pitch to the closest viewer and content detail.

Are both EA576H1 and EA500H9 suitable for rain at outdoor events?

Both document IP65 front and IP54 rear protection, and the EA576H1 source notes the two sides have different ratings. EA500H9 outdoor models also list a -20 °C to +60 °C working range. Confirm the exact front and rear rating, operating range and installation conditions for the quoted cabinet before relying on the model-level rating.

Can both cabinets form curved outdoor walls?

Yes, both document optional high-precision curve hardware. EA576H1 offers an optional high-precision curved lock and asks buyers to confirm supported angles and layout. EA500H9 offers optional high-precision arc locks that index a set angle so a curve repeats at the same radius, and the source says to order arc locks with the cabinets.

Which cabinet is lighter for transport?

EA576H1 lists an 8 kg cabinet. EA500H9 lists 7.5 kg for outdoor cabinets and 6.5 to 7 kg for indoor cabinets. Compare the exact quoted configuration and loaded flight-case weight, because accessories and packaging change the transport plan.

Do both support front and rear service?

Yes. EA500H9 documents magnet-mounted modules for front access and a rear-opening power box, with a detachable rear box on a HUB connection. EA576H1 documents magnetic modules for front access and a rear service route, with a detachable rear power box and back cover and a HUB connection design.

Which model documents mixing with a 500×1000 mm cabinet?

EA500H9 documents that its 500×500 mm cabinet bolts to the 500×1000 mm EA1000H9 horizontally and vertically on the same 250 mm module grid. The supplied EA576H1 passages do not document a 500×1000 mm mixed-splice partner, so confirm any mixed layout with the supplier.

Share your project requirements to request a quote.