EA500H8 vs EA576H1: Outdoor Rental LED Cabinet Wall Increments

Quick answer

Choose the cabinet that matches the wall increment and the outdoor pitch range you can support. EA500H8 is a 500 x 500 mm cabinet with 250 x 250 mm modules and outdoor P2.6, P2.97 and P3.91 options. EA576H1 is a 576 x 576 mm cabinet with 288 x 288 mm modules and P3.79 or P4.8 options. EA500H8 lists 6.5 kg outdoor cabinets and 4500-6000 cd/m2 depending on model. EA576H1 lists 8 kg and 4500 cd/m2. Both document front and rear service, IP65 front and IP54 rear protection and optional curve locks.

Sources used: EA500H8 specs; EA576H1 specs

Wall increments decide the cabinet format

The EagerLED EA500H8 uses a 500 x 500 mm cabinet and 250 x 250 mm modules for indoor and outdoor event video walls. Its outdoor configurations are listed at P2.6, P2.97 and P3.91, so a touring wall built on this cabinet advances in 500 mm steps across and down. One cabinet covers 0.25 m2, and the supplied example states that a flat 4 x 3 m wall needs 8 columns and 6 rows: 48 cabinets, excluding the support structure.

The EagerLED EA576H1 uses a 576 x 576 mm cabinet and 288 x 288 mm modules. Its listed outdoor pitches are P3.79 and P4.8. Plan wall dimensions in 576 mm increments: the source gives a 10-cabinet-wide row as 5.76 m. That increment is the first practical difference for event walls, because it changes how the finished width and height divide into cabinets before pitch or brightness is considered.

Outdoor pitch, brightness and protection

EA500H8 outdoor models list P2.6, P2.97 and P3.91. Brightness is 4500-6000 cd/m2 depending on the model, and the series specifies at least 3840 Hz refresh, 14-bit grayscale and a 140-degree viewing angle. Outdoor models are rated IP65 at the front and IP54 at the rear. Those are configuration-specific values, so the exact outdoor model must be named on the quotation rather than treating the family as one specification.

EA576H1 offers P3.79 or P4.8, with listed module resolutions of 76 x 76 pixels and 60 x 60 pixels respectively; P3.79 provides more pixels within the same cabinet size. Both listed configurations are given as 4500 cd/m2 brightness, 14-bit grayscale, a 140-degree viewing angle and at least 3840 Hz refresh. The specified protection grades are IP65 at the front and IP54 at the rear, and the source notes the two sides have different ratings.

EA500H8 vs EA576H1 outdoor rental cabinet comparison

Cabinet weight, handling and service access

EA500H8 lists 6.3 kg indoors or 6.5 kg outdoors for the 500 x 500 mm cabinet. It documents front and rear maintenance access, magnetic LED modules and a cabinet designed for access from either side. Its back cover and power box are detachable with a quick-release buckle, and the HUB connection design links modules to cabinet electronics. Four corner guards help protect module edges during handling, packing and assembly. For transport planning, request the exact loaded flight cases weight because the cabinet figure alone does not describe the complete touring load.

EA576H1 lists an 8 kg cabinet. It supports front and rear service access, with magnetic LED modules for front access and a rear service route. Its rear power box and back cover are detachable, using a quick-release buckle and a HUB connection design. Handles, fixing slots and quick locks help crews position and connect panels, and corner protectors help protect module edges during handling. The source advises confirming module removal tools, spare modules and service clearance when planning rental inventory.

Curve locks and mixed-cabinet planning

EA500H8 offers an optional high-precision curve lock. Specify curved installation when requesting the quotation so the lock configuration matches the planned screen shape, and confirm the available angle range and screen radius before finalizing the design. The cabinet also supports mixed layouts with EA500H7, EA500H8V and EA1000H8 cabinets. Ask EagerLED to confirm cabinet connections, pixel pitch and control compatibility before combining models in one video wall.

EA576H1 offers an optional high-precision curved lock that allows the cabinets to form an arc-shaped LED wall. Request this option when ordering a curved stage backdrop, and confirm the supported angles and layout before finalizing the design. The curved lock is optional equipment, so share the required screen width and curvature so the quotation includes the appropriate cabinet locks and accessories. The supplied passages do not document a mixed-cabinet partner for this model, so treat any mixed arrangement as a separate written confirmation item.

Spare-module planning and quotation scope

For EA500H8, the source advises confirming the matching power supply, receiving card and spare parts when ordering a rental fleet. Spare modules should be identified by exact pitch and by indoor or outdoor protection class, because indoor models are IP31 and outdoor models are IP65 front and IP54 rear. The cabinet uses 250 x 250 mm modules, so the spare line should name that module size and the exact pixel pitch it fits.

For EA576H1, specify compatible spare power supplies and receiving cards with your order. Confirm the supplied electronics and connection layout before ordering replacement parts, because project configurations may differ. The cabinet uses 288 x 288 mm modules, so the spare line should name that module size and the exact P3.79 or P4.8 pitch it fits. Keep cabinet, control, spare parts, curve hardware and freight separate when you compare LED screen quotes, so each included item is visible.

Decision sequence for an outdoor event wall

Start with the wall increment. Choose EA500H8 when a 500 mm cabinet grid, 250 mm module grid, outdoor P2.6/P2.97/P3.91 options, 6.5 kg outdoor cabinet weight and mixed H8 layout potential fit the fleet. Choose EA576H1 when a 576 mm cabinet grid, 288 mm module grid, P3.79 or P4.8, 4500 cd/m2 and an 8 kg cabinet fit the event and the crew’s handling plan. Then compare the exact outdoor model, front and rear protection, service route and curve-lock inclusion.

Defer the final choice if the exact curve radius or lock angle, spare-module pitch, service clearance or mixed-cabinet compatibility is not yet documented. Ask for a written quotation line for the exact model, pixel pitch, brightness, protection rating, cabinet weight, quantity and spare parts. That sequence is editorial purchasing advice, not a manufacturer requirement.

Scenario checks for event wall increments

EA576H1 ten-cabinet row length

Illustrative calculation: 10 × 0.576 = 5.76 m. Each EA576H1 cabinet is 576 mm wide; 576 mm is converted to metres and 10 cabinets are arranged in one row, matching the source example.

EA500H8 flat 4 x 3 m cabinet count

Illustrative calculation: 8 × 6 = 48 cabinets. 8 columns and 6 rows of EA500H8 500 x 500 mm cabinets for a flat 4 x 3 m wall, excluding support structure, matching the source example.

Buyer checklist

• Measure the wall width and height, then state the required cabinet increment: 500 mm for EA500H8 or 576 mm for EA576H1.
• Name the exact outdoor model, pixel pitch, brightness, front and rear protection rating and cabinet weight on the quotation.
• Confirm the front and rear service route, module removal tools and service clearance for the installed wall.
• Confirm optional curve-lock inclusion and the supported angle or radius for the exact model before finalizing the layout.
• Match spare modules, power supplies and receiving cards to the exact pitch and cabinet format.
• Separate cabinets, control equipment, spare parts, transport cases and freight in an itemized request so inclusions are visible.

Frequently asked questions

Which cabinet fits a 500 mm or 576 mm event wall increment?

EA500H8 is a 500 x 500 mm cabinet with 250 x 250 mm modules. EA576H1 is a 576 x 576 mm cabinet with 288 x 288 mm modules. Plan dimensions accordingly; the EA576H1 source gives a 10-cabinet-wide row as 5.76 m, and the EA500H8 source gives a 500 mm cabinet grid with 0.25 m2 per cabinet.

Which outdoor rental cabinet has the wider listed pitch range?

EA500H8 outdoor models list P2.6, P2.97 and P3.91. EA576H1 lists P3.79 and P4.8. If the event needs P2.6 or P2.97 outdoors, EA500H8 documents those options; if P3.79 or P4.8 fits the viewing plan, EA576H1 documents those pitches.

Which cabinet is lighter for touring?

EA500H8 lists 6.3 kg indoors and 6.5 kg outdoors for its 500 x 500 mm cabinet. EA576H1 lists an 8 kg cabinet. Request the exact quoted cabinet weight and loaded flight-case weight, because accessories and transport packaging are separate from the bare cabinet figure.

Do both models support front and rear service?

Yes. EA500H8 documents front and rear maintenance access, magnetic LED modules and a cabinet designed for access from either side. EA576H1 documents front and rear service access, with magnetic modules for front access and a rear service route. Confirm the service route and clearance for the installed orientation.

Are curve locks standard on these outdoor rental cabinets?

No. EA500H8 lists an optional high-precision curve lock, and EA576H1 lists an optional high-precision curved lock. Specify curved installation when requesting the quotation and confirm the supported angle range or radius, plus whether the lock hardware is included for the exact model.

How should spare modules be planned for either cabinet?

Match spare parts to the exact cabinet format and pitch. EA500H8 uses 250 x 250 mm modules and the source advises confirming the matching power supply, receiving card and spare parts. EA576H1 uses 288 x 288 mm modules and the source advises specifying compatible spare power supplies and receiving cards with the order.

Share your project requirements to request a quote.