EA1000C6 vs EA1000F2: Which LED Cabinet Suits a Building Facade?

Quick answer

For a permanent building facade, choose the EA1000F2 fixed outdoor cabinet: it is documented for fixed outdoor advertising, IP65 for outdoor installation, 1000×1000 mm, P2.97–P10.42, 5,000 or 6,500 cd/m², front and rear module service, and optional 45° bevel or 90° curve cabinets. The EA1000C6 is a 500×1000 mm rental cabinet for repeated event assembly; its outdoor model lists IP65 front and IP54 rear. Use it for temporary campaigns, not as the default permanent facade cabinet.

Sources used: EA1000F2 specs; EA1000C6 specs

Start With Installation Life and Exposure

A building facade project usually means a permanent or semi-permanent installation, so installation life comes before cabinet price or pitch. The EA1000F2 is documented as a fixed outdoor advertising LED screen for commercial buildings, roadside billboards and large-format digital signage. The EA1000C6 is documented as a 500×1000 mm rental LED screen for event and AV businesses, with indoor or outdoor models and a cabinet system designed for repeated assembly and dismantling. That scope split is the first filter when comparing fixed versus rental. If the wall will stay in one advertising position, start with EA1000F2. If the screen will be struck, stored and rebuilt for a temporary campaign, start with the EA1000C6 outdoor model and confirm how it will be mounted on the facade.

Exposure also changes the question. EA1000F2 documents IP65 protection for outdoor installation and is described for fixed outdoor installations such as shopping centres, commercial building façades, roadside digital billboards and landmark media displays. The EA1000C6 outdoor model lists IP65 at the front and IP54 at the rear, while indoor models are IP31. That rear rating matters on a facade because the back of the cabinet, service door or cable entry may be exposed or only partly sheltered. Ask for written confirmation of the protection rating for each exposed face and the installed orientation, then compare that answer with an IP rating by face review rather than treating a series name as a site rating.

Cabinet Format, Handling and Geometry

The documented cabinet formats differ. EA1000F2 uses a 1000×1000 mm aluminum cabinet listed at 28.4 kg, built on a 500×250 mm module platform with six cabinet formats: 1000×500, 1000×750, 1000×1000, 1500×500, 1500×750 and 1500×1000 mm. It documents quick locks and positioning posts to align adjacent cabinets, plus module safety tethers for secondary retention during installation and service. EA1000C6 uses 500×1000 mm cabinets and can connect vertically with the EA500C6 500×500 rental LED display for mixed-size layouts. The EA1000C6 source does not list a cabinet weight in the supplied passages, so request the exact cabinet weight and quantity for the structural review.

Handling features point in different directions. EA1000C6 uses a die-cast aluminum frame with stainless-steel locks and screws, aluminum-alloy handles, positioning beads for alignment, quick locks on the top and left sides, and four corner protectors for exposed LED edges during transport, installation and teardown. EA1000F2 documents hard-connected LED modules that reduce exposed internal cabling and keep power and data connections inside the cabinet. Geometry is optional hardware on both sides. EA1000F2 offers optional 45° beveled-edge cabinets in three sizes that pair to form a 90° outside corner, plus optional 90° curved cabinets in three sizes for rounded-corner installations. EA1000C6 offers optional angle hardware for concave and convex LED walls, with a cabinet layout to confirm. For a facade with a corner, compare the 45° beveled corner and 90° curved cabinet options for EA1000F2 before assuming a flat cabinet count covers the geometry.

EA1000C6 rental vs EA1000F2 fixed outdoor for a building facade

Pitch, Brightness, Refresh and Service Access

EA1000F2 has seven pixel-pitch configurations from P2.97 to P10.42, with 5,000 or 6,500 cd/m² brightness depending on configuration, at least 3,840 Hz refresh, 16-bit grayscale and a 140° viewing angle. The EA1000C6 source says all listed models offer at least 3,840 Hz refresh, 14-bit grayscale and a 140° viewing angle, and that brightness varies by model. The supplied EA1000C6 passages do not list a pitch range or specific brightness values, so request the quoted pitch, configured brightness and content test for the exact cabinet. Use a pixel pitch and viewing distance method to define the closest regular viewer and smallest on-screen text before comparing offers.

Service access is a site condition, not just a cabinet feature. EA1000F2 LED modules can be installed and removed from either the front or rear of the cabinet, and the dual-service design is described for wall-mounted projects with limited rear clearance and structures with dedicated rear service space. EA1000C6 documents an openable back cover that gives technicians access to the power supply near the service door, and cabinet ventilation supports heat dissipation. It does not document front module service in the supplied passages. On a building facade, ask how the exact cabinet will be reached in the installed orientation: from the front, from a rear service corridor, or from a lifting platform. If the back of the screen will be finished or unreachable, treat the service route as a blocking question before accepting the configuration.

Weather, Temperature and Mounting Conditions

EA1000F2 documents IP65 protection for outdoor installation, published AC 90–264 V input and a -20 to +60°C working-temperature range for its published configurations. It also documents thermal management using aluminum module baseplates and vortex cooling fans, with the power supply mounted against the cabinet door panel using thermal paste. EA1000C6 outdoor models list IP65 at the front and IP54 at the rear, and the source says to confirm installation conditions and weather protection for rear connections. Indoor EA1000C6 models are IP31. For a facade, pass the exact quoted figures to the electrical designer and confirm the rear-face protection, cable entries and service openings rather than relying on a front-only rating.

Mounting scope follows the product purpose in the supplied evidence. EA1000F2 is documented for fixed outdoor advertising installations, with quick-lock installation, front and rear module service, optional corner cabinets and published six cabinet formats. EA1000C6 is documented for rental use, with handling hardware and repeated assembly and dismantling, plus optional angle hardware for concave and convex walls. If the facade is permanent, the documented fixed outdoor starting point is EA1000F2. If the facade is used for a temporary campaign and the wall must be removed and reused, the EA1000C6 outdoor rental cabinet is the documented starting point, subject to the rear IP54 condition and an agreed mounting method. Confirm the mounting method in writing for the exact site.

Quotation and Acceptance Checks for a Facade

Build the quotation around the decisions that change the delivered screen: model, indoor or outdoor version, cabinet size and quantity, pixel pitch, configured brightness, IP rating by exposed face, operating temperature, service route, mounting hardware, corner or curve hardware, control equipment, spare modules and freight. EA1000F2 quotations should name which of the six cabinet formats is priced, the selected pitch from P2.97 to P10.42, whether brightness is 5,000 or 6,500 cd/m², and whether optional 45° bevel or 90° curve cabinets are in scope. EA1000C6 quotations should name the outdoor or indoor model, the 500×1000 mm cabinet, the quoted pitch and brightness, and any mixed EA500C6 cabinets or optional angle hardware. Keep these as separate EA1000C6 quotation lines so inclusions can be compared.

Use a line-by-line method to compare LED screen quotes rather than a headline total. Keep cabinets, control equipment, spares, packaging, freight, mounting structure, commissioning and optional geometry on their own lines so offers can be judged on the same inclusions. This is our purchasing advice, not a statement about EagerLED’s required format. For a permanent facade, the acceptance check should confirm EA1000F2 as the quoted fixed outdoor model, its IP65 basis, its exact cabinet size and weight, its pitch and brightness, and the service route. For a temporary facade campaign, confirm the EA1000C6 outdoor model, its IP65 front and IP54 rear ratings, its rear service access and its handling and curve hardware.

Facade scenarios and documented starting points

Buyer checklist

• State installation life first: permanent facade or temporary campaign, then select EA1000F2 fixed outdoor or EA1000C6 outdoor rental as the documented starting point.
• Request written IP rating for each exposed face; EA1000F2 documents IP65 for outdoor installation, while EA1000C6 outdoor lists IP65 front and IP54 rear.
• Confirm exact cabinet size and quantity; EA1000F2 uses 1000×1000 mm and six formats, while EA1000C6 uses 500×1000 mm and can mix with EA500C6 500×500.
• Name the quoted pitch and configured brightness; EA1000F2 lists P2.97–P10.42 and 5,000 or 6,500 cd/m², while EA1000C6 pitch range and brightness values must be requested.
• Confirm service route and mounting method for the installed orientation; EA1000F2 documents front and rear module service, and EA1000C6 documents rear access.
• Confirm optional corner or curve hardware if the facade turns; EA1000F2 offers 45° bevel and 90° curve cabinets, and EA1000C6 offers optional angle hardware for concave and convex walls.

Frequently asked questions

Can the EA1000C6 outdoor rental cabinet be used on a permanent building facade?

The supplied evidence documents EA1000C6 as a rental LED screen for event and AV businesses and repeated assembly and dismantling; EA1000F2 is documented as a fixed outdoor advertising screen for commercial buildings and facades. For a permanent facade, the documented starting point is EA1000F2. If you want to use a rental cabinet permanently, ask the supplier for a written position on the exact cabinet, rear IP54 condition and service route.

What IP ratings apply to each model for a facade?

EA1000F2 documents IP65 protection for outdoor installation. EA1000C6 outdoor models list IP65 at the front and IP54 at the rear, while indoor models are IP31. Confirm the rating for each exposed face, service opening and cable entry.

Which cabinet sizes and weights should be checked?

EA1000F2 uses a 1000×1000 mm aluminum cabinet listed at 28.4 kg and supports six cabinet formats from 1000×500 to 1500×1000 mm. EA1000C6 uses 500×1000 mm cabinets and can connect vertically with EA500C6 500×500 cabinets; the supplied EA1000C6 passages do not list a cabinet weight, so request the exact weight and quantity.

Does EA1000F2 offer corner cabinets for a facade?

Yes. Optional 45° beveled-edge cabinets are available in three sizes and pair to form a 90° outside corner for building corners and right-angle advertising displays where content must continue across two faces. Optional 90° curved cabinets are available in three sizes for rounded-corner installations and can support wraparound content and glasses-free 3D campaigns when content is produced for the planned viewing position.

How should pitch and brightness be selected for a facade?

EA1000F2 offers P2.97 to P10.42 and 5,000 or 6,500 cd/m² depending on configuration. The supplied EA1000C6 passages do not list a pitch range or specific brightness values; request the quoted pitch and configured brightness for the exact cabinet, then test the smallest on-screen text at the closest regular viewer position.

What service access should a facade buyer confirm?

EA1000F2 LED modules can be installed and removed from front or rear. EA1000C6 documents an openable back cover and rear access to the power supply near the service door. On a facade, confirm how the exact cabinet will be reached in the installed orientation, including any rear clearance or lifting platform.

Share your project requirements to request a quote.