Quick answer
For EA1000F2, choose the optional 45° beveled-edge cabinet when the site has a true 90° outside corner between two flat faces and content must continue across both. Choose the optional 90° curved cabinet when the corner should read as rounded and you plan wraparound or glasses-free 3D content produced for the planned viewing position. Confirm corner cabinet size, pitch, brightness, IP65 rating and service access for the quoted configuration.
Sources used: EA1000F2 specs; EA960F4 specs
Begin with the physical corner you already have
EA1000F2 is a fixed outdoor advertising LED screen for commercial buildings, roadside billboards and large-format digital signage, and its option list includes a 45° bevel and a 90° curve. The beveled cabinet is available in three sizes and cabinets pair to form a 90° outside corner; the manufacturer describes it for building corners and right-angle advertising displays where content must continue across two faces. If your structure is two flat planes meeting at a right angle, that is the documented match.
The curved option is also offered in three sizes, but it is described for rounded-corner LED installations rather than sharp corners. Its curved surface can support wraparound content and glasses-free 3D campaigns when the content is produced for the planned viewing position. That makes the curved cabinet a content-led decision as well as a structural one, because the corner shape and the campaign plan have to agree before the order is placed.
Map the content across the corner before you choose
With the 45° beveled option, the documented purpose is content continuing across two faces at a 90° outside corner. If the campaign will not cross the corner, the geometry still suits a right-angle display, but the buying reason becomes site fit rather than content continuity. Decide whether the two faces carry one continuous canvas or two independent messages before you set the artwork, the playback canvas and the face-by-face pixel map.
With the 90° curved option the wording is conditional: the curved surface can support wraparound content and glasses-free 3D campaigns when the content is produced for the planned viewing position. The supplied material does not state that a 3D effect appears automatically. If glasses-free 3D is a project requirement, ask whether the proposed content has been prepared and tested for the exact curve and the actual viewer positions before production.
EA1000F2 corner geometry decision guide
| Decision | 45° beveled-edge cabinet | 90° curved cabinet | What to confirm |
|---|---|---|---|
| Site condition | Described for building corners and right-angle advertising displays where content must continue across two faces | Described for rounded-corner LED installations | Measure the actual corner and decide whether it must read as a sharp 90° outside corner or a rounded corner |
| Documented geometry | Available in three sizes; cabinets pair to form a 90° outside corner | Available in three sizes; the curved surface can support wraparound content and glasses-free 3D campaigns when content is produced for the planned viewing position | Exact corner cabinet size, quantity and pairing for the proposed layout |
| Content brief | Content continues across two faces | Wraparound or 3D material prepared for the planned viewing position | Whether the two faces share one canvas or two messages, and whether 3D artwork has been tested for the curve |
| Configuration figures | Optional item within the EA1000F2 series | Optional item within the EA1000F2 series | Confirm pitch (P2.97–P10.42), brightness (5,000 or 6,500 cd/m²), IP65 and operating range for the quoted corner cabinet |
| Service access | Model supports front and rear module service; corner access depends on installed geometry | Model supports front and rear module service; corner access depends on installed geometry | How modules, power and control components are reached in the final position |
Confirm cabinet size, brightness and pitch for the corner scope
The series is built on a 500 × 250 mm module platform that supports six cabinet formats from 1000 × 500 mm up to 1500 × 1000 mm. Each corner type is offered in three sizes, and three corner sizes do not map one-for-one onto six flat formats. Do not assume a corner cabinet shares the footprint of the flat cabinet you have already measured; ask for the exact corner cabinet dimensions, weight and quantity for the proposed layout.
Series figures include seven pixel-pitch configurations from P2.97 to P10.42 and 5,000 or 6,500 cd/m² brightness, with a refresh rate of at least 3,840 Hz, 16-bit grayscale and a 140° viewing angle. A pixel pitch and viewing distance check frames the readability question, but the corner cabinets are optional items. Confirm that the quoted corner cabinet carries the same pitch, brightness, IP65 rating and operating range as the flat cabinets in the same order.
Plan service access and the electrical envelope
Modules can be installed and removed from either the front or the rear of the cabinet, and the dual-service design is described as letting technicians choose the access method that fits the site, including wall-mounted projects with limited rear clearance and structures with dedicated rear service space. At a corner, the access path depends on the installed geometry, so confirm how the corner cabinet’s modules, power and control components are reached in the final position.
The 1000 × 1000 mm aluminum cabinet weighs 28.4 kg, quick locks and positioning posts align adjacent cabinets during assembly, and module safety tethers provide secondary retention during installation and service. Published configurations list AC 90–264 V input and a -20 to +60 °C working-temperature range, and the source states that final electrical design should follow the selected model and local requirements. Pass the exact quoted corner model data to the electrical and structural designers.
When a different fixed outdoor cabinet fits the site better
EA960F4 is another fixed outdoor advertising display with documented corner options. Its optional 45° beveled cabinet is offered in 960 × 960 mm and 960 × 640 mm formats, and two cabinets can form a 90° right-angle outdoor LED display for building corners and corner billboard installations. Its optional 90° curved cabinet supports rounded-corner splicing and is described as creating a continuous corner surface for glasses-free 3D advertising content.
That alternative is built around a 960 × 960 × 80 mm aluminum cabinet with IP65 protection and front and rear maintenance, and it lists five pixel pitches from P4.44 to P10. Its module platform is 480 × 320 mm, with cabinet formats of 960 × 960, 1,440 × 960 and 1,440 × 640 mm. If the first model’s cabinet formats or corner sizes do not suit the structure, this is the related fixed outdoor option to compare on the same corner questions.
A selection sequence you can take to the supplier
First, measure the corner and record whether it is a true 90° outside corner between two flat faces or a rounded corner. Second, name the content intent: one message continuing across both faces, a wraparound canvas, or a glasses-free 3D campaign with material prepared for the planned viewing position. Third, confirm the corner cabinet size, pitch, brightness option, IP65 rating and operating range for the quoted configuration. Fourth, confirm the service route at the corner and the spare-module size.
Choose the beveled option when the site has a right-angle building corner and the campaign benefits from continuity across both faces. Choose the curved option when the corner should read as rounded and the content plan includes wraparound or 3D material produced for the planned viewing position. Defer the decision if the corner angle is unmeasured, if artwork has not been mapped to the chosen geometry, if corner cabinet dimensions or weight are not quoted, or if the service route is still open. These are our buyer checks, not manufacturer requirements.
Keep flat and corner cabinet lines separate in the quotation
A fixed outdoor billboard quotation commonly bundles cabinets, video controller, mounting structure, power and signal distribution, spare modules, freight, installation and commissioning. Ask for flat cabinets and corner cabinets as separate lines so each offer prices the same geometry and the same service assumptions; this is our purchasing advice, not a manufacturer requirement. When you compare LED screen quotes, separate lines keep the corner scope visible instead of buried in a blended total.
Outdoor site scenarios and what to confirm
| Site scenario | What to confirm |
|---|---|
| Two flat façades meeting at a true 90° outside corner with one continuous brand message | Lean toward the 45° beveled-edge cabinet; confirm the outside corner formation and that both faces carry one content canvas. |
| Rounded corner with a planned wraparound or glasses-free 3D campaign | Lean toward the 90° curved cabinet; confirm the content is produced for the planned viewing position and fits the actual viewer positions. |
| Limited rear clearance behind the corner display | Confirm the front service route for the exact corner cabinet; the model documents front and rear module service, but corner geometry affects the access path. |
| Structural or weight limit at the building corner | Confirm the weight of the quoted corner cabinet; the 1000 × 1000 mm cabinet weighs 28.4 kg and both corner types are offered in three sizes. |
| The quoted cabinet formats do not suit the structure | Compare EA960F4, which documents optional 45° beveled and 90° curved corner cabinets in its own formats and cabinet sizes. |
Buyer checklist
- Measure the corner and classify it as a sharp 90° outside corner or a rounded corner before choosing between the two optional cabinet types.
- For the beveled option, confirm the cabinets pair to form the 90° outside corner and that artwork is mapped across both faces.
- For the curved option, confirm that wraparound or 3D content is produced for the planned viewing position before production.
- Request the exact corner cabinet size, weight, pixel pitch, brightness and IP65 rating for the quoted configuration.
- Confirm the front or rear service route at the corner in the installed orientation, plus spare-module and power or control access.
Frequently asked questions
Can the EA1000F2 45° beveled-edge cabinet form a rounded corner?
The supplied material describes the 45° beveled-edge cabinet as pairing to form a 90° outside corner and as intended for building corners and right-angle advertising displays. Rounded-corner installations are described for the optional 90° curved cabinet. If you need a specific curve, ask the supplier to confirm whether the beveled cabinet can serve that shape.
Does the EA1000F2 90° curved cabinet produce glasses-free 3D automatically?
The source states that the curved surface can support glasses-free 3D campaigns when the content is produced for the planned viewing position. That condition places content preparation and viewer-position testing on the project, so confirm with the supplier that the proposed material has been prepared and tested for the exact curve.
What brightness and pixel pitch apply to the EA1000F2 corner cabinets?
The series lists seven pixel-pitch configurations from P2.97 to P10.42 and 5,000 or 6,500 cd/m² brightness, with at least 3,840 Hz refresh, 16-bit grayscale and a 140° viewing angle. The corner cabinets are optional items, so confirm the exact pitch, brightness and IP65 rating for the quoted corner configuration rather than assuming the top series figure applies.
How is service access planned at an EA1000F2 corner?
Modules can be installed and removed from either the front or the rear, and the dual-service design lets technicians choose the access method that fits the site, including wall-mounted positions with limited rear clearance. Confirm the module, power and control access route for the corner cabinet in its installed orientation.
What operating temperature and AC input should the electrical designer work from?
Published EA1000F2 configurations list AC 90–264 V input and a -20 to +60 °C working-temperature range, and the source states that final electrical design should follow the selected model and local requirements. Confirm those figures for the exact quoted corner cabinet.
Share your project requirements to request a quote.
Check the details
Sources & references
Source pages can change. Access dates record when they were consulted.
- EA1000F2 specs Accessed 30 September 2026
- EA960F4 specs Accessed 28 September 2026
Put these details into your project brief.
Tell EagerLED the application, destination and screen dimensions you have in mind.
Request a project quote