An EagerLED resource. Public-source references and technical guidance; not a binding quotation. Read our methodology.

Quick answer

An LED billboard costs about US$3,700 to US$45,000 per face for the LED screen itself, depending mainly on its size and pixel pitch. A 6 × 12 ft (1.92 × 3.84 m) poster-size face costs about US$3,679 at P8, a 10 × 20 ft (3 × 6 m) face US$12,942–US$14,508, and a full 14 × 48 ft bulletin face US$39,049–US$45,060. A double-sided board needs two faces, so the screen cost doubles.

Sources used: EA1000F2 specifications; EA960R4 specifications; EA-OFixed specifications

The screen is only part of the LED billboard cost. The steel structure and foundation, the permit, the power connection, installation and the control system are priced for each site, and on a new roadside structure they can match or exceed the screen. Running costs are mostly electricity, spare parts and connectivity.

This guide prices standard billboard sizes with EagerLED outdoor cabinets, then covers pixel pitch, brightness, single vs double-sided faces, operating costs and how owners work out payback.

LED billboard cost by size

Billboard faces come in a few standard formats. The table builds each one from whole cabinets, so the active area is close to, not exactly, the nominal size. Prices are for one face.

Billboard format Cabinet layout Active area Pitch Screen price per face Resolution
Junior poster, about 6 × 12 ft EA960R4, 4 × 2 cabinets of 960 × 960 mm 3.84 × 1.92 m (12.6 × 6.3 ft), 7.37 m² (79.4 sq ft) P8 US$3,679 480 × 240
Junior poster, about 6 × 12 ft EA960R4, 4 × 2 cabinets 3.84 × 1.92 m (12.6 × 6.3 ft) P5 US$3,768 768 × 384
10 × 20 ft poster (48-sheet) EA1000F2, 6 × 3 cabinets of 1000 × 1000 mm 6.00 × 3.00 m (19.7 × 9.8 ft), 18 m² (193.8 sq ft) P10.41 US$12,942 576 × 288
10 × 20 ft poster (48-sheet) EA1000F2, 6 × 3 cabinets 6.00 × 3.00 m (19.7 × 9.8 ft) P6.25 US$14,508 960 × 480
10.5 × 36 ft digital poster EA1000F2, 11 × 3 cabinets 11.00 × 3.00 m (36.1 × 9.8 ft), 33 m² (355.2 sq ft) P10.41 US$23,727 1056 × 288
10.5 × 36 ft digital poster EA1000F2, 11 × 3 cabinets 11.00 × 3.00 m (36.1 × 9.8 ft) P7.81 US$24,783 1408 × 384
14 × 48 ft bulletin EA-OFixed, 14 × 4 cabinets of 1024 × 1024 mm 14.34 × 4.10 m (47.0 × 13.4 ft), 58.72 m² (632.1 sq ft) P16 DIP US$39,049 896 × 256
14 × 48 ft bulletin EA1000F2, 15 × 4 cabinets 15.00 × 4.00 m (49.2 × 13.1 ft), 60 m² (645.8 sq ft) P10.41 US$43,140 1440 × 384
14 × 48 ft bulletin EA1000F2, 15 × 4 cabinets 15.00 × 4.00 m (49.2 × 13.1 ft) P7.81 US$45,060 1920 × 512

Reference ex-factory prices from the EagerLED Aug 2026 price list, in USD, for the standard configuration; final pricing is subject to a formal quotation. They cover the display cabinets with their modules, power supplies and receiving cards. The structure, video processor and media player, electrical work, freight, duties, permits and installation are not included.

Per unit of area, these billboards cost US$499 per m² (US$46 per sq ft) for EA960R4 P8, US$665 per m² (US$62 per sq ft) for EA-OFixed P16 and US$719–US$806 per m² (US$67–US$75 per sq ft) for EA1000F2 from P10.41 to P6.25. The outdoor LED screen price guide lists every outdoor pitch and cabinet if your board is not a standard size.

What else goes into the total LED billboard cost

Owners who budget only for the screen are usually surprised by the rest. A digital billboard project has seven cost blocks, and only the first is a catalog item:

Cost block What it covers How it is priced
LED screen Cabinets, modules, power supplies, receiving cards Per m² or per cabinet, as in the table above
Control and content Sending card or video processor, media player, remote management, 4G or fiber link Per project, plus a monthly data or software fee
Structure Monopole or wall frame, catwalk, foundation, wind-load engineering Quoted by a local steel and civil contractor
Electrical New supply, cabling, distribution board, surge protection, metering Quoted by a local electrician and the utility
Permits Sign permit, zoning approval, structural and electrical sign-off Set by the local authority; time is often the bigger cost
Installation Crane, crew, commissioning and calibration Per site
Spares and service Spare modules and power supplies, inspection visits A small share of the screen price per year

Converting an existing static billboard is the cheapest route, because the structure, foundation and often the permit already exist. The structure still needs an engineer’s check, since an LED face is heavier than vinyl: the 60 EA1000F2 cabinets of a 14 × 48 ft face weigh about 1,704 kg (3,757 lb) at 28.4 kg each, and the 56 EA-OFixed P16 cabinets about 2,240 kg (4,938 lb) at 40 kg each, before any frame. A new structure on a greenfield site adds foundation work and a longer approval process, and in many cities the permit decides whether a digital board can be built at all.

The hardware vs installed cost guide shows how these blocks add up on other LED projects.

Pixel pitch: what resolution a billboard really needs

Billboards are read from a distance, so they need far fewer pixels than an indoor wall. A useful rule of thumb is that the closest comfortable viewing distance in meters is about one to two times the pixel pitch in millimeters, and that most viewers should be several times farther away than that.

Typical site Main viewing distance Usual pitch range Example in this guide
Highway or expressway bulletin 60–300 m (200–1,000 ft) P10–P16 EA-OFixed P16 DIP, EA1000F2 P10.41
Urban arterial road, traffic lights 20–100 m (65–330 ft) P8–P10 EA1000F2 P10.41, EA960R4 P8
Street corner, car park, shopping center entrance 8–40 m (25–130 ft) P5–P8 EA1000F2 P6.25, EA960R4 P5
Pedestrian plaza, transit concourse 4–15 m (13–50 ft) P3–P5 See the outdoor price guide

Finer pitch costs less extra than many buyers expect. On a 10 × 20 ft EA1000F2 face, moving from P10.41 to P6.25 adds US$1,566 to the screen price (US$12,942 against US$14,508) and gives 2.8 times as many pixels. On a highway bulletin seen only from far away, that money is better spent on brightness or a second face. On a corner site where people stop at traffic lights 20 m away, the finer pitch makes small text and logos readable. The pixel pitch and viewing distance guide explains the calculation.

Check the finished resolution against the advertising files you plan to accept. Many digital billboard networks publish creative specifications in pixels, so a 1440 × 384 P10.41 bulletin and a 896 × 256 P16 bulletin need different artwork even though both are “14 × 48”.

Brightness and LED type for billboards

A billboard faces open sky, so it needs high brightness in the day and controlled dimming at night. The EA1000F2 P6.25, P7.81 and P10.41 models list 6,500 cd/m² (nits). EA960R4 P8 lists 5,500 cd/m². For long-distance sites in strong sun, DIP LEDs go further: the EA960R4 P10 DIP model lists 8,000 cd/m² and EA-OFixed P16 DIP 10,000 cd/m².

DIP brightness has a price. At the same P10 pitch and the same 960 × 960 mm EA960R4 cabinet, the SMD version costs US$499 per m² and the DIP version US$836 per m². For a 14 × 48 ft face built from 60 EA960R4 cabinets, 14.40 × 3.84 m (47.2 × 12.6 ft), that is US$27,593 for SMD against US$46,227 for DIP. Choose DIP when the board faces direct sun for most of the day and must be read from far away; choose SMD for most urban roadside sites.

Whatever the LED type, ask for a light sensor with automatic dimming and a night schedule. Many jurisdictions limit billboard brightness after dark, and a board running at full daytime brightness at night wastes power and draws complaints. The outdoor LED brightness comparison covers how many nits each site really needs.

Single-sided vs double-sided LED billboards

Most roadside structures carry two faces, either back to back or in a V shape, so that traffic in both directions sees an advert. The second face doubles the screen cost but not the whole project: the pole, foundation, permit and power connection are shared.

Format One face Two faces
6 × 12 ft poster, EA960R4 P8 US$3,679 US$7,358
10 × 20 ft, EA1000F2 P10.41 US$12,942 US$25,884
10.5 × 36 ft, EA1000F2 P10.41 US$23,727 US$47,454
14 × 48 ft, EA1000F2 P10.41 US$43,140 US$86,280

A back-to-back board also changes the service plan. Two faces mounted against each other leave no walkway behind, so front service matters. EA1000F2 modules can be removed from the front or the rear, which suits back-to-back faces and wall-mounted boards. EA960R4 is serviced from the rear through an openable back cover, so it fits single faces with a catwalk behind. The magnetic vs hub front service comparison covers the service options in more detail.

Running costs: power, spares and connectivity

Electricity is the largest running cost of an LED billboard. Manufacturers publish a maximum power, which sizes the electrical supply, and an average power, which is closer to everyday use; the average vs maximum LED power guide explains the difference.

Billboard Maximum power (supply sizing) Average power Energy at 18 h per day
10 × 20 ft, EA1000F2 P7.81 (450 / 150 W/m²) 8.1 kW 2.7 kW about 48.6 kWh per day, 17,700 kWh per year
14 × 48 ft, EA1000F2 P10.41 (550 / 185 W/m²) 33.0 kW 11.1 kW about 200 kWh per day, 72,900 kWh per year
14 × 48 ft, EA960R4 P10 DIP (330 / 110 W/m²) 18.2 kW 6.1 kW about 110 kWh per day, 40,000 kWh per year

Multiply the yearly energy by your own electricity tariff. At an illustrative US$0.15 per kWh, the 14 × 48 ft EA1000F2 face would use about US$10,900 of electricity a year and the 10 × 20 ft face about US$2,700. Night dimming and darker content lower real consumption; a board that runs 24 hours at full brightness uses more. These are rated figures per face, so a double-sided board uses twice as much.

Spare parts are a small but important line. A 14 × 48 ft EA1000F2 P10.41 face has 480 modules of 500 × 250 mm. Keeping about 2% in stock means 10 modules at US$55 each, US$550, plus a few power supplies and receiving cards. Spares from the same production batch keep color consistent when a module is replaced years later. The LED screen shipping, maintenance and running cost guide lists what else to budget.

Add a 4G or fiber connection with remote monitoring, so that the operator can update content, see a failed cabinet and prove to advertisers that their spots played.

LED billboard payback: how owners run the numbers

A digital billboard earns money by selling time, not space. Content plays in a loop, and each advertiser buys a share of that loop. A common pattern is spots of 6 to 10 seconds in a loop of about one minute:

Spot length Loop length Advertiser slots per face
6 seconds 60 seconds 10
8 seconds 64 seconds 8
10 seconds 60 seconds 6

Monthly revenue is roughly: slots per face × share of slots sold × monthly rate per slot × number of faces. Monthly costs are electricity, site lease, connectivity, maintenance, insurance and sales commission. Payback in months is the total project cost (screen, structure, permits, power, installation) divided by monthly revenue minus monthly costs.

Rates per slot depend entirely on the location’s traffic count and the local market, so take them from local media owners or an outdoor advertising sales partner, not from a hardware supplier. Two numbers matter most in the model: occupancy, because an unsold slot earns nothing, and the cost of the structure and permit, because that is the part you cannot reuse if the site fails. A cheaper screen rarely changes the payback much; a better location does.

Billboards that sell their own products, such as a car dealer, a fuel station or a shopping center sign, do not sell slots. For them, compare the board with what the business already spends on printed banners and static billboards. The outdoor digital signage guide covers on-premise signs, and the mobile LED signage guide covers trucks and trailers.

What an LED billboard quote should include

Ask every supplier to price the same scope so that the totals can be compared. A low screen price can hide a missing controller or a vague installation line.

Item What to check
Screen Exact model, pitch, LED type, brightness, cabinet count, active size and resolution
Faces One or two faces; V-shape or back to back
Control Sending card or video processor, media player, remote management software, 4G or fiber modem
Brightness control Light sensor, automatic dimming and night schedule
Service Front or rear service and how the structure gives safe access
Spares Number of spare modules, power supplies and receiving cards from the same batch
Electrical Maximum power per face, supply voltage (220–240 V or 110–120 V) and protection
Structure and permit Who designs, engineers, permits and builds the structure
Delivery Packing, freight, duties and delivery address

Then compare total cost per face, not just price per square meter. The guide to comparing LED screen quotes gives a checklist for side-by-side offers.

To get a price for your site, send the face size, the number of faces, the main viewing distance and the direction the board faces through the quote form. A photo of the existing structure helps if you are converting a static billboard.

Frequently asked questions

How much does an LED billboard cost?

The LED screen for one billboard face costs about US$3,700 for a 6 × 12 ft poster and US$39,000–US$45,000 for a 14 × 48 ft bulletin, based on EagerLED outdoor cabinets at US$499–US$806 per m². The full project also includes the structure, permit, power connection, control system and installation, which are priced per site.

How much does a 14 × 48 digital billboard cost?

The screen for one 14 × 48 ft face costs US$39,049 with EA-OFixed P16 DIP cabinets, US$43,140 with EA1000F2 P10.41 and US$45,060 with EA1000F2 P7.81. A double-sided bulletin needs two faces, about US$78,000–US$90,000 for the screens alone.

How much does it cost to run an LED billboard per month?

Electricity is the main cost. A 14 × 48 ft EA1000F2 P10.41 face averages about 11.1 kW, roughly 6,000 kWh a month at 18 hours a day, so about US$900 a month at an illustrative US$0.15 per kWh. A 10 × 20 ft face uses about a quarter of that. Add connectivity, maintenance, insurance and the site lease.

How long does an LED billboard last?

Outdoor LED billboards are commonly planned for about 8 to 10 years of service, with LEDs dimming gradually rather than failing at once. Life depends on heat, running hours and brightness settings, so good ventilation, night dimming and spare modules from the same batch extend it. Ask the supplier for the warranty and service terms in writing.

What pixel pitch is best for a billboard?

For highway bulletins seen from 60 m (200 ft) or more, P10 to P16 is enough. For city roads viewed from 20–100 m, P8 to P10 is common. For corner sites and car parks where people stand within 8–40 m, choose P5 to P8.

Do I need a permit for an LED billboard?

Almost always. Digital billboards normally need a sign permit and zoning approval, and many authorities set limits on brightness at night, how often the message changes and distance from other signs. Check the local rules before ordering the screen.

Is a double-sided LED billboard twice the price?

The screen cost doubles, but the full project does not. Both faces share the pole or structure, the foundation, the permit and the power connection, so a second face usually adds less than the first one cost.

Is it cheaper to buy an LED billboard or advertise on one?

For a single business, buying space on an existing digital billboard is usually cheaper than building one. Owning a billboard makes sense when you control a high-traffic site and can sell most of the ad slots, or when the board replaces ongoing spending on your own signs.

Check the details

Sources & references

Source pages can change. Access dates record when they were consulted.

  1. EA1000F2 specifications Accessed 17 November 2026
  2. EA960R4 specifications Accessed 17 November 2026
  3. EA-OFixed specifications Accessed 17 November 2026

Put these details into your project brief.

Tell EagerLED the application, destination and screen dimensions you have in mind.

Request a project quote